http://www.fixya.com/support/p52121-amana_dlw330ra_top_load_washerSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comFri, 25 Dec 2009 23:58:56 GMT80http://www.fixya.com/support/t3163903-tilting_drumThe drum doesn't center on its own after is being tilted to a side and seems to tilt during washing. I checked and all the springs are in place and nothing wrong with them.Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t3084353-machine_not_agitate_or_spinmachine does not agitate or spinFri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t2523430-belt_brokewant to replace myself what do i need to doFri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t2434739-drive_belt_broken_dlw330raw_washerWhat needs to be removed in order to replace drive belt? How best to do this and are there any special tools required? The belt was dry and very hard so I assume the only problem is the belt itself, but could there be an unlying cause? TIAFri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t2452475-ihave_amana_washer_model_dlwraw_ithasI have an Amana washer model DLWRAW. It has a replacement transmission part # 12002178. The machine does not agitate, I suspect worn splines and would like to replace the agitator. What agitator do Ipurchase to fit this transmission?Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t2433133-amana_noise_while_washing_not_whenThere is a noise, kind of squeaky,grinding noise while the washer is washing, However, it does not make the noice while it is spinning. Does anyone have any ideas on what could be wrong?Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t1892496-hot_water_fill_tubCOLD WATER FILLS TUB BUT HOT WATER DOESN'T COME IN AT ALL IT STARTED AFTER THE WATER TANK WAS REPLACED. COULD IT BE SEDIMENT?Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t1446517-washer_spinwasher will do everything but spin. what do you think the problem is?Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t1886116-open_washer_lookHOW DO YOU OPEN THE WASHER TO TAKE A LOOK AT WHAT IS GOING ON?Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t1717672-amana_dlw330_washer_belt_urned_brokei cleaned the pump pulley, replaced the belt and it worked well for 3 or more washes and 5 days, then burned an broke again.Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t910717-amana_dlw330ra_loud_leakingMy Amana washer, model # DLW330RA, has been REALLY LOUD (regular noise just as though someone turned the volume all the way up) for about 3 months. When it started making the noise it was also leaking. Naturally I blamed my husband :) The noise...Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t227523-changing_beltHow do I change the belt?Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t489351-loud_whirring_soundDuring the spin cycle there is a loud whirring sound, it is spinning, however the water does not completely drain out.... if you shake the basket, you can hear the water...... could there be something stuck in the filter/pump and/or out of...Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t203618-machine_fills_drainsI begin the cycle and the machine fills and drains at the same time. It never gets to the agitate cycle?Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t443485-springshow to place the springs on the outer tubFri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t382326-amana_washer_pump_assemblyIs there a way to take the pump assembly apart? Looks like a dress sock was pulled into the intake somehow...can't figure out how it go through or around the bucket itself... Any suggestions? And yes, tried pulling the sock out but only came out so...Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t373152-water_wont_stopwater did not shut off . Washer kept filling. Even with washer unplugged water continued to run into washerFri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t188948-washing_machine_problemsI have a Maytag washer model LAT8234AA3. Last night i turned it on and it filled about half way up with water and then it stopped. I turned the switch off and then back on and it wouldn't restart . I tryed every cycle, all the temp. settings, and all...Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t190520-hotpoint_wf220_washing_machinewhen i switch power on, all display lights illuminate for a second then go off. Then there seems to be no power to the appliance at all. i then have to switch off at the plug socket, leave for eight seconds and switch on again with the same results. ...Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t192365-hotpoint_aquarius1100_electrical_probmy machine has just been moved from one house to another 4th floor flat today,and upon using it it seemed to work fine then it tripped the switch on that circuit ,it then seemed to work fine to just spin if i put it on that part of the cycle.now...Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t192086-washing_machine_will_not_drainI've lost my manuel for the washing machine. Fault report showing on the machine is F04? It's a BOSCH 1400 Express Exxcel, can anyone help???Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t194153-hoover_600m_washing_machine_cycle_issueOur washing machine won't progress through it's normal cycle. The dial no longer moves or clicks through to the next step in the washing cycle.Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t194612-rubber_cuplingThe rubber cupling that connects the motor to the gear box appears to be the problem...my question is how difficult is that to fix and the best way to dismantle the unit to repair it. Thanks in advance for your advice and help. BrantFri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t194678-kenmore_top_loaderwill drain but wont spin.something black hanging down from motor.look's like a belt .Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t195056-hotpoint_wma10_washing_machine_wont_stopthis model of washing machine when starting up will not stop filling up .tried different programmes .it has just started doing it today .have to stopit and spin to drain it. there was that much water today that it started coming through the...Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t197570-maytag_neptune_6500_burn_sealLast night, I washed some clothes with two pillows. Looks like the pillows were rubbing against the seal? (the plastic thing next to the door) and now that seal has a hole. It is not big but I don?t want to wash until know if that?s really bad (maybe...Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t197645-used_kenmore_stackable_washer_dryer_p_nI bought a used kenmore stackable washer and dryer P/N 145781-000A. I wired an outlet for it in my condo. Since the plug has four prongs I installed a four prong outlet, but there are only three wires coming from the box: two 120v. hot wires and...Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t195536-whirlpool_lgr7648kq1_top_loader_washerWasher fills, goes through wash cycle, but won't drian or spin. Timer continues to function normally after wash cycle, but when it gets to the drain cycle a motor hum (similar in sound like a stuck garbage disposal unit) happens for a few seconds...Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t200684-washer_machine_drains_while_fillingI just received a used whirlpool washer maching..I tried to see the model # but it looks like it has been "wiped" off of it... It drains as it is filling. The spin and rinse cycle work. I tried raising the hose to 39" like I read somewhere, but that...Fri, 25 Dec 2009 23:58:56 GMThttp://www.fixya.com/support/t200789-problem_indesit_we16My indesit we16 keeps on saying door on the lcd screen about 3 mins after i try and start it. I changed the door interlock but this has not resolved the problem. Can anyone help?Fri, 25 Dec 2009 23:58:56 GMT