20 Most Recent Amana PTH153B50AE Air Conditioner - Page 5 Questions & Answers

0helpful
1answer
0helpful
1answer

I have an amana furnace

Check on your door cover and you will see the flash code and you will figure out what's wrong with your unit
2/1/2018 1:37:24 PM • Amana Heating &... • Answered on Feb 01, 2018
0helpful
1answer

Air Conditioner not dripping

your relative humidity outside and in is low so it's not condensating on the coils is the only thing I can think of.
1/14/2018 4:09:51 PM • Amana Heating &... • Answered on Jan 14, 2018
0helpful
2answers

Fan not spinning on Amana RCB30B2A unit. Compressor is running though

It's the run capacitor for your fan. You'll need to pull it out and replace it. Look on Youtube about how to replace a condensing fan run capacitor. Make sure you get the same voltage and microfarad rated capacitor. Make sure you also disconnect the power to the unit. You can get the part at any HVAC parts house or Grainger. Should cost around $15
1/12/2018 10:29:14 PM • Amana Heating &... • Answered on Jan 12, 2018
0helpful
1answer

Amana furnace has turns on for a minute then off, it may stay on for a few minutes or seconds and repeats...we have heat, but blower is intermitten...what do i do???

You will need to verify that you have constant high and low voltage AT THE MOTOR. If the voltage remains constant and the motor still running intermittently then the motor is bad. If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79
12/6/2017 5:54:46 PM • Amana Heating &... • Answered on Dec 06, 2017
0helpful
1answer

There is a burning smell when the heat is turned on my Amana PTC093B35AJ wall unit. How do I eliminate it?

just let it run, it should go away after a few cycles. dust accumulates in the elements, just needs to burn off. if smell persist after 12 hours may want to have it looked at. If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79
11/11/2017 5:01:33 PM • Amana Heating &... • Answered on Nov 11, 2017
0helpful
1answer

Have amana furnace model GACA070AX30. FURNACE HAS A 5 FLASHES ON ERROR CODE. FURNACE STARTS UP REACHES THERMOSTAT SETTING, BURNERS SHUT OFF BUT FAN MOTOR WILL NOT SHUT OFF. IT ALSO TRIPS ROLLOUT LIMIT

This is a dangerous situation. If your rollout is being tripped open, the heat is going where it should not be going. The fan stays on because it is designed to dissipate the heat.
11/3/2017 7:29:07 PM • Amana Heating &... • Answered on Nov 03, 2017
0answers
Not finding what you are looking for?
Heating & Cooling Logo

16 questions posted

Ask a Question

Usually answered in minutes!

Top Amana Heating & Cooling Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you an Amana Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Amana Heating & Cooling

  • Amana Heating & Cooling

Most Popular Question

amana pth153b50ae

  • Heating & Cooling
Loading...