20 Most Recent
Philips VOIP3211S/05 IP Wireless Phone Questions & Answers
I have a philips VOIP
Try going to Philips website and locate your phone andd see it there is an driver update for Windows 7.
If there is download it and try again.
Hope this helps.
4/15/2011 2:29:47 PM •
Philips...
•
Answered
on Apr 15, 2011
Are there any drivers for the philips voip3211s/05
if anyone else has ahd a problem with the drivers for vista on the philips website, i found that after hours of trying, and 2 phone calls to the customer care department, you need to right click on the link, and choose to save the link to a location on your computer, then after it has downloaded, open the file in the place that you saved it.
8/25/2010 10:28:39 AM •
Philips...
•
Answered
on Aug 25, 2010
Handset reads "searching"
The reason the handset says "Searching" is because it can not find its Base Station. What handset works with a notebook? I had not heard of such a thing.
9/16/2009 12:19:34 AM •
Philips...
•
Answered
on Sep 16, 2009
Contacts list
I had a WIndows vista incompatible driver so downloaded a new driver from Philips.com and followed the instructions and whoopdiwoo it all seems to work EXCEPT that people I am calling can't hear me so I am not 100% sure what microphone it should be set to. The download said default it to the systems mic and speakers but when I made a call it was defaulting to voip phone. So all in all solved one and all my contacts coming up and still one to solve! Also haven't a clue yet how to use it as a land line phone as well.
4/10/2009 8:14:21 AM •
Philips...
•
Answered
on Apr 10, 2009
Losing quality for the 3211s fone
I and 2 of my colleagues were losing quality for this fone during use. I then downloaded the driver again from the Philips website and....voiala......sorted. All 3 fones now operational and great quality reception. Seems there is a problem with Vista and the CD issued with the fone.
Dave B
How to disable theft mode on monitor philips? 276E 4K
The theft deterrence option is available from the SmartControl software that runs on a Windows PC connected to the 276E monitor. See
https://www.usa.philips.com/c-p/276E8VJSB_27/4k-ultra-hd-lcd-monitor/support . Scroll down to the Software & drivers section. Then unzip the file to install it.
Inside the software, the theft deterrence item is under the Options section of the menu. Since a PIN is needed to enable or disable the "feature". It seems unlikely to be enabled accidentally. Did someone else use the monitor for a while? Are you using a different computer with the Philips 276E?
I hope this helps.
Cindy Wells
11/14/2023 12:35:19 AM •
Philips...
•
Answered
on Nov 14, 2023
Image flashes for one second on screen then goes away
There could be a few different issues that could cause the behavior you're describing. Here are a few possibilities:
HDMI connection issue: Make sure the HDMI cable is properly connected to both the TV and the laptop. If you're using a HDMI splitter or HDMI switch, make sure those are also properly connected.
HDMI port issue: If you've tried multiple HDMI cables and still have the issue, there could be an issue with the HDMI port on the TV or laptop. You could try a different HDMI port on the TV or laptop, or use a different device to see if the issue persists.
Display settings: Make sure the display settings on the laptop are set to display on the external monitor (the TV in this case). If the laptop is set to display on the built-in monitor, it may cause the display to flash on and off.
Hardware issue: If none of the above solutions help, there could be a hardware issue with the TV or laptop. It's possible that the display controller or other hardware component is faulty and causing the display to flash on and off. In this case, it may be necessary to have the device repaired or replaced.
I hope this helps! If you have any further questions, please don't hesitate to ask.
12/30/2022 2:00:34 AM •
Philips...
•
Answered
on Dec 30, 2022
Not finding what you are looking for?
