20 Most Recent Logitech (980158) Headset - Page 9 Questions & Answers

Hi, you have a pre owned device ! meaning it most likely has been paired with another device as a result of this you can't automatically pair your device you will need to do it manually . See page 9 of the manual below for procedure. https://www.jabra.com/_/media/BlueParrott_Product-Documentation/BP-B450-XT-Classic/User-Manuals/RevA/BlueParrottB450-XT_User_Guide_EN.pdf

Your body is affecting the ground plane and therefore the load on the radio.

Have you tried going into the blue tooth section of the phone to see if it can 'see' the signal from the earbuds? Some earbuds need to be put into 'pairing mode' to connect. The most common method used is to press and hold the power button down, Press and hold the power button. Do not release the button for at least 5 seconds. You should hear the start up tone and then another separate tone. This is the earth buds going into pairing mode. You phone should then be able to find and pair to the earbuds.

See if these specialty forums help. If not contact Uniden for warranty repair. https://www.google.com/search?q=BC75XLT+won%27t+scan+within+bank+1 ..

Question edited for full 'make model (what it is)'. Question moved from Television and Video category. Contact them for a warranty repair.

Warranty and service information - BlueParrott

https://www.blueparrott.ca > footer-pages > warranty BlueParrott products: one (1) year from the date the products have been purchased; C300-XT MS/B450-XT MS: two (2) years from the date the products have been ...

• BlueParrott B250-XTS ' BlueParrott Support

  https://www.blueparrott.ca > supportpages > blueparrott... Get support for your BlueParrott B250-XTS. Find all product ... BlueParrott B250-XTS SE expand_more. BlueParrott B250-XTS ... Registration and warranty. ..

are you using the antennas that are installed thru the mirrors or the ones on the side of the truck. If you are using them you should make sure that they are connected to the coax. some just get thrown together ,antenna to mount then one end of coax to ??? so take a multi meter and set it on x1.Touch bottom of the antenna and the connector that come out of the dash. If you are connected you should get a reading. If you are not ,then you will have a problem hearing anyone because you are not connected to the antenna but the coax. If the connection is good to go then I would try running a ground wire to the chassie and maybe even a ground strap.

Unfortunately, no. Although the Foxtel iQ3 and iQ4K STUs do have Bluetooth functionality built in, it is only used for pairing a compatible Foxtel remote control - Bluetooth audio is not supported. You will need to pair your headphones with your television set which will transmit audio from the Foxtel STU via HDMI.

Try the speciality forums. It appears to be Australian and we are in North America. https://www.google.com/search?q=super+sidekick+to+a+lafayette+ssb-140 http://home.ptd.net/~n3cvj/telsatssb140.htm ..

https://www.manualslib.com/manual/334326/Uniden-Bc200xlt.html

Open up your cell phone's blue tooth settings and look for your new earbuds on the list of nearby devices. Select it. Do this when you touch your earbuds to search and connect via blue tooth,

If the bluetooth you are referring to is a bluetooth earbud, the batteries may be dead. You may need to buy a new earbud.

Make sure that the pair on your output device states paired for phone and music. It can still pair for phone and data but not pair to stream music. This is common on android devices especially. If this be the case, unpair the device and forget (delete) the earbuds on your output device. Ensure any bluetooth devices like amazon Alexa, TVs and other common things are powered down. Turn the bluetooth on the output device off, then back on. Search for earbuds and follow manufacturer procedures to sync earbuds. Once found, pair. Ensure when a successful pair happens that they are paired for phone and music. It will tell you on the output device if the pair was successful for both. At this point make sure your volume settings are not muted or all the way down and you should be enjoying music if you have an app playing music.

gauge--wiring--connection--sending unit failure

U have repeat on. Find it and turn off

I found an original Realistic trc-207 users guide. I have the ability to scan manuals to a USB flash drive and turn the file into a pdf file. If anyone wants a copy of the trc-207 manual. Just supply me a blank flash drive and shipping both ways. I live on SSA so I don't have a lot of play money.

Video https://www.youtube.com/watch?v=szcVhpY6sCI and more https://www.google.com/search?q=turn+off+the+beep+on+a+Dewalt+DXFRS800 ..

this is either an unlocked PLL or battery issue in most instances, These links should prove very helpful to you http://www.manualagent.com/radio-shack/pro-163/users-manual http://marksscanners.com/164_300/164.shtml http://www.scancat.com/OnLineHelp/OEM_Radio_Owners_Manuals/PRO-163-164-OWNERS%20MANUAL_2000164_PM_EN.pdf

SWR Meter operation is fairly simple. The manual for SWR-3 is here with instructions and schematic. https://www.opekantenna.com/proimages/SWR-3.pdf Videos as well https://www.google.com/search?q=vanco+meter+swr-2+manual ..

CS-F3011 Icom Software for IC-F3011 & F4011 - Download

https://quality2wayradios.com > store > icom-cs-f3011-... Icom Programming Software for IC-F3011 & F4011 ... This item is for download only. We no longer ship CD's. This cloning software is designed to perform data entry ...

IC-F3011/F3013/F4011/F4013 Instruction Manual - Icom ...

https://www.icomamerica.com > downloads > Do... PDF manual contains important operating instructions for the IC-F3011/. IC-F3013 vhf transceivers ... ceived, according to the pre-programming. (For IC-F3013/.

https://www.google.com/search?q=100+watt+cb+modulator+with+variable+power ..