20 Most Recent Jabra BT125 Headset - Page 8 Questions & Answers

Make sure the Jabra headset is set to pairing mode, otherwise the phone cannot find the headset. The manual should have instructions to set the headset in pairing mode. While the headset is in pairing mode, have the G1 search for the headset (Settings > Wireless Controls > Bluetooth Settings). When it finds the headset select it and type 0000 for the PIN code.

it's normally always 0000

grtz,
htmlfreak.

hi vrajasekar20, thank you for using fixya.

to pair your jabra to a PC for headset use, you have to install the jabra PC Suite first and use it as your default sound input / output device.

The PDF file below will give you a step by step instruction on how to have it installed and working.

http://www.jabra.com/sites/Jabra/GNimages/Products/Adapter/A330/A330_FAQ_EM_EN_2838.pdf

Should you need more info on this matter,please do not hesitate to let us know.

regards,

voodoo

lost password

to connection to your phone or device
turn off your jabra then press and hold the big white button until the light stay on the search for your device

Might want to check with Jabra, they can probably send you one for cheap. My advice: don't ever purchase Jabra again, they are cheaply made and unreliable. I use plantronics only.

Did you ever figure out what was wrong. Mine is doing the same with my LG shine. I will have to take it in for service. You had the problem quite awhile ago. Hoping you got an answer.

I am having the same problem did you try the jabra website?

I had the same problem trying to connect my old Jabra BT125 headset to my brothers PS3, here's what worked for me:

-Turn on the headset by holding down the button but keeping it down until a solid light comes on.

This puts the headset into discovery mode, you can the start scanning for the device and it should find it.

You simply need to hold the button down for a long time, it will flicker blue at first, don't let go of the button, and it'll turn blue for pairing.

Make sure the headset is off and there are no flashing lights. On ps3 go to settings and look around cuz i cant remeber were it is at but look for manage devises or manage blue tooth devices something like that. You will select that and it will ask you if you want to search for devices. WAIT! First you need to put your headset in pairing mode. Hold down the side button (the one that flashes blue when it is on) and you will see it turn on and flash. DO NOT LET GO OF THE BUTTON!! KEEP IT HELD DOWN UNTIL THE LIGHT STAYS BLUE, NO FLASHING. you are now in pairing mode! Select search for bluetooth devices on your ps3 and it will begin scanning. keep your headset close to your ps3. When your ps3 finds it, it will ask for a code. Enter 0000. Thats it! ENJOY!

First make sure your bluetooth and your phone are fully charged. Next press the on - off button in the middle of your bluetooth until it is a solid blue color. If it is flashing it is not in the pair mode. Just hold it down until it is a solid blue light.
Then set your phone to the pairing mode following your phones set up bluetooth instructions. Select the discover, search, or add function on your phone. Your phone should find the bluetooth device and ask "do you want to pair with it?" Accept by pressing yes or ok on the phone and entering the passkey or pin # of 0000 or 4 zeros.
Your phone should confirm when pairing is complete.

I discovered that I was not holding the on-off button down long enough for my bluetooth to reach the pairing mode and give me a solid blue light.

I hope this helps as I know how frustrating this can be.

This happened to my bluetooth also. I am not sure what I actually did that made it start to work again but it did.
I think it had something to do with the volume control. I think that I might have accidently placed the call on hold.
I hit the volume control and also the on off switch and it started working again.
I hope this helps.

this is same my problem icant drive it in PC vista

try putting your phone into activate new device and than your tooth into discover mode, than your phone will ask you for password key and put in 0000 and press the o.k. button and pair it. it works most of the time. good luck.
Thanks

once u have it registered to the ps3 make sure the bluetooth is on on ur XMB. Go to "Accessory Settings" and choose "Audio Device Settings"
make sure ur bluetooth is listed then highlight it  press triangle and connect it if done right a mic test will pop up and u will be able to listen to urself adjust settings as needed hope this helps

Not many people use headsets on Motorstorm.
Maybe you just haven't found anyone else who has one yet.

it seems to me that you have not charged the unit because i had to do that when i got mine ...i had to charge it for 2 hour

Fixya doesn't work that way. When you set up your phone for car comm, you told it what station to broadcast at. That is a station that has no music when it is on. As far as the headset, it may be used up. Don't baother looking for batteries, go to EBAY and get another headset. If you have found this helpful, please post as such. You can go live for faster answers