20 Most Recent
Kenwood DNX7100 Car Video Player Questions & Answers
DNX7100 Security Code Password
While code request mode,point the remote control to the unit and enter this code 55222277or 552222777(depending the remote contro you are using)(try to press the numbers that faster you can) that is way you type KCAR from the remote control.
you will not see any change on the screen while you entering the number,only when you enter the last number the unit will go to standby mode.
if you make a mistake,reset the unit and start all over again.
let me know if works
thank you
Kca-bt200
Charge the headset for at least 24 hours to reset it and that should delete the link key, then try re-pairing.
Kenwood dnx 7100 shuts off sporadically
If it is shutting off and coming right back on I would defintley take another look at your ground connection. This is the most likley cause for the sudden turn offs. Especially if it comes right back on.
Factory controls interface?
Call these guys at hifiaudio.com and purchase the SWC module that matches your vehicle (ask for Scroche brand). Once you purchase the SWC module, make sure you read the installation instructions two or three times before you install it. Once installed, these SWC units work great. I just completed the installation on my 2008 F150 with the Kenwood DNX-7100 and my steering wheel interface works perfectly.
[email protected]
NO PASSWORD
When at the password screen, use the remote and spell out KCAR like you would on your mobile phone (55 222 2 777). That should unlock it.
Not finding what you are looking for?