http://www.fixya.com/support/p5149-la_pavoni_pisa_pa_35_espresso_machineSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comTue, 07 Oct 2008 07:37:46 GMT80http://www.fixya.com/support/t790140-la_pavoni_pisa_pa_35_espressoThe question was in the portafiltro (the filter assembly which carries the coffee), there are two springs - a simple coil spring whose position is obvious, and a tiny whisker spring whose position isn't , The spring was dislodged when I opened and...Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t747849-cleaning_portafiltroIf anyone has successfully reassembled the portafiltro, do you know where the tiny spring is meant to go. I can guess that it's meant to push back the small oddly shaped cam that raises and lowers the coffee port cleaner, but can't find the way to...Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t369598-la_pavoni_pisaI have a la pavoni pisa, and have apparently blown the fuse on the power cord. I need to access the back of the machine to get to the fuse. Can you tell me how to remove the black steam control knob on the right side of the machine?Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t224861-defective_coffee_makerA Coffee Maker purchased from Walmart, Niagara Falls, Canada. has a defective switch. When switched off the hot plate remains on, even though the switch light goes out. Model#XQ582. "Durabrand", Quality control certificate B6. This itrem was...Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t371225-krups_9000_keeps_setting_off_safteykrups xp9000 coffe machine, sets off the saftey switch on the house mains? was not doing this yesterday why today? please help iam in need off a short black with 2sugars.....????Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t375953-saeco_incantoi have wather comming out when i select steam , can you help me tankyou andreTue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t382079-braun_aromaster_10_coffee_makerI have a Braun Aromaster 10 cup coffee maker which is not keeping the coffee as hot as it has been. Now it is also not allowing all the water to drip through. Some does, then it stops for quite a while, lets a little more through and stops...Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t405269-bloomfield_coffee_maker_repairMy company has a Bloomfield Coffee maker model # 8572 - one of the burner switches will not turn off and the heating plates seem loose- I need a LOCAL repairman to look at it please! I have been on the net for and hour and can't get any results! ...Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t543047-melitta_meu45_stemI have that same pot that I'm throwing away because the heating element is burned out (boutght it for a buck at a sale and they said it didn't work, but I figured it would be fixable....same problem as you found; NO PARTS available). Anyway, you are...Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t572729-coffee_makerI have a sunbeam coffee maker 7400 digital. I set it to come on at 5am for hubbys coffee, by the time I get up at 8am it has turned itself off. How can I keep it on?Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t609011-braun_espresso_machine_replacement_partI need a new frothing attatchment for my Braun espresso machine #3062. It is a white plastic 2 piece screw on diffuser that fits on the end of the steamer part. sent mine through the garbage disposal and it no longer fits on the machine. Any ideas?...Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t632477-coffee_maker_rival_modle_cm800Will not make coffee does not heat at all. lights for no and off work clock & programmer OKTue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t728663-still_need_replacement_thermal_carafeI have one! Its not new but its in great shape. Its available if you contact me. Thanks, MichelleTue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t730895-need_repair_serviceSaeco Aroma - won't pump and now won't switch on. Need a repair service within easy driving distance of Ridgefield, CT 06877Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t846965-find_instructions_cuisinart_coffee_makerHi, I've bought this coffee maker second hand but it came withoutinstructions. I can't seem to find one on the internet, I'm hoping youcan help me with this. It is the Cuisinart DCC-390 PC model. Thanks in advance, BillTue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t867167-coffee_makerI'll go check but I've only had it for a few months. Where would this disconnection be? Inside the housing or on the outside?Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t868367-espresso_makerI have decalified my cuisinart EM-200 espresso machine and now realize that the problem is that the water will not come through the area where the coffee is held. The water just sits above it and builds up pressure.Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t986849-wife_barista_sin_006_1995Unit made coffee, not espresso, replaced pump, descaled all plumbing, had power to pump after reconnecting electricals. Pump worked! Water at room temperature (obviously no steam). Circuit beaker tripped. Traced electricals doing continuity checks...Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t1021403-espresso_will_not_come_saeco_gran_cremaI have had this machine for some time, about 8 months ago the water was not coming through the coffee...thought perhaps it was ground too fine but that wasn't it...realized that I had not descaled it so I did and cleaned the portafilter and it seemed...Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t1038809-increasing_water_flow_rateHow do I adjust the machine to increase the water flow rate to the coffee basket? I have a La San Marco 2 group head manual. My water flows at about 250ml in 7 seconds. Far too fast meaning that I am compensating to get my 60ml in 25 second shot...Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t227531-leaking_around_groupMy ECM Giotto is 3 years old and recently started leakin. I called the place where I bought it and they suggested it might need new gaskets around the group. I received them but have no idea how to remove the old one which has become very hard. I am...Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t250055-electrical_cord_coffee_urn_percolatorHi, I am missing the electric cord to West Bend 58030 Coffee Maker. Where could I find a replacement cord? Thanks, MadelineTue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t389483-saeco_via_venezia_overheat_cut_outHave had my saeco via venezia in for repairs 3 x now because it overheats and trips its overheat cutout switch. Would love to know how to reset it myself as it takes 4-6 weeks to get it through the repair centre. It happens if I steam milk and forget...Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t692879-manual_delonghiI just bought a delonghi caffe siena from a garage sale. The problem is it did not have a manual. Where could I find a manual to download? I quess this machine was bought at a Herberger store a couple of years ago.Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t765971-wiring_diafram_gaggia_cubikaI have tryed to get the above but I'm getting no were fast. I'm an electronics egineer now retired, and I dont see the necesity for paying over E100 inh orther to change the 3 SWTs in the above. Unfortunally, my wife through away the diagram that I...Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t218021-briel_artemis_problemmy espresson machine stopped brewing; it still makes noise albeit a lower noise than normal while brewing and water doesn't come dripping out anymore; i dont' think it's clogged but rather the pump may stop working? thanks for any advice donTue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t13613-know_coffee_beans_freshHow do I know if the coffee beans are fresh?Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t13607-buy_seals_inside_coffee_makerWhere can I buy the seals for the inside of the coffee maker. I fabracated one but it doesn't do the job. Everywhere I have looked tells me that they don't sell these things because it takes a factory trained repair person. help?Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t13612-water_leaks_from_bottom_coffee_makerWhat if water leaks from the bottom of the Coffee Maker?Tue, 07 Oct 2008 07:37:46 GMThttp://www.fixya.com/support/t102556-filter_basket_retains_waterBeginning yesterday morning, our 10 cup B&D Cafe Noir is retaining about two cups of water in the filter basket. Spring looks OK, nothing seems to be sticking - it just is retaining the water. What is the problem? JohnMuirTue, 07 Oct 2008 07:37:46 GMT