http://www.fixya.com/support/p514236-technics_sl_1200mk2_turntableSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comTue, 07 Oct 2008 07:25:38 GMT80http://www.fixya.com/support/t1046614-phono_preamp_buzzI'm running my sl1200mk2 through an audio technica ATPE03 phono preamp into bose powered computer speakers through anRCA (red/white) cable... it's emitting a huge buzz, even when not on, but just connected... the wires seem fine, any suggestions?Tue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t1032444-stylus_pressure_set_in_terms_manual_butAlthough I think I have set the stylus pressure control per the manual I seem to be doing something wrong as the arm skates accross the vinal when I have used the appropriate pressure. Unfortunately I no longer have the overhang gauge so I have...Tue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t699376-technic_12000I am getting no sound out of the left hand side of my technic1200 mk 11 deck. I have changed the leads and this made no difference.Any suggestions to the fault?Tue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t918896-technics_sl_1200mk2_turntable_needI aquired a second hand turn table and the power switch was missing. Can I replace with a spare part? Where can I get these?Tue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t966420-volumeI am a noob when it comes to turntables. I inherited an sl 1200mk2. I can not figuire out how to get the volume to play louder. I have a very nice sound system but can not get to play at high volumeTue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t968149-best_waywhat is the best way of cleaning your whole tone arm and hight adjustment on a technics 1200 mk2 as just brought second hand one and works great but very dirty thanks dj fluant-cTue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t942005-technics_1210s_mk2everytime i put new internal fuse in it will play untill i touch or scatch the record then the fuse blows change styleses and earth still the same please help thanksTue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t602821-technics_sl_1200_mk2_french_not_power_upAt first, the turntable would begin normal and then go into warp mode by playing back in reverse and forward. I went to power it on today and no luck. No lights, seemed as if the tt was dead. It is set at 110v and it began to this recently. Wondering...Tue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t995198-cartridge_buy_turntableI bought the turntable and went to assemble it -=but it doesn't include a cartridge. What cartridge goes with this turntable and where can I buy it? thanks from paulao in nycTue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t907622-no_powerno powerTue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t909392-new_record_playing_some_issuesSorry, new to playing LPs.. When I try to play a record I'm getting a very high screeching sound. I thought the needle was pressing up against the record too much but I raise it a bit and the record starts skipping. Probably something simple, but I'm...Tue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t916390-tone_armThe problem that I am Having is with the screw on top of the tone arm. It is too tight. The needle stays in the same place on the LP. I have tried to loosen it and have damaged a number of screwdrivers. The screw is stuck. Any suggestions on how to...Tue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t659319-technics_1210_feedback_grounding_problemat mid to high volumes when the needle is on the record and u touch or tap the deck u can hear the tap or touch coming through the speakers, have tried several different cartridges to no avail have also changed rca and earth cables to no avail, any...Tue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t792912-technics_turntablesHi my name is Vick, and i bought a used 1210 technics turntable, my problem is the PITCH CONTROL its not right, it speeds way up when its positive "2" it really sucks because i can spin correctly.. but when i place it on the green light "0" it reads...Tue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t782826-power_problemI was using my 1200 for about 4 hrs like i do in any event a suddenly the leds on the on off went off, but i turned it back on and it gets power but when i push the start button the leds blink and lower the power and the platter never spins, what...Tue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t661023-technics_1200i just aquired some technics 1200's when turning them on the light came on for a second then went off...i now cant get any power, i have replaced the fuse in the plug still no joy...any thing i can do atall...please please helpTue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t630935-technics_sl_1600_mk2I replaced the servo belt under the tonarm and the tonarm does not come anymore to the end of the LP; it plays the LP normally but stops in the middle of the LP and stays there continuing skipping the same track...if I lift the tonarm with my hand...Tue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t405236-power_switch_woesthe power switch on my turntable is broken..the black part ontop that rotates has come off and the record player will not turn on.? I am not sure if a piece is missing (it appears that way)...or if it can be fixed.? any suggestions?Tue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t469941-technics_mk2Well on my technics MK2 1210's, the little anti sketch settings and all the others probably arent set to what they are supposed to be, because my needle arm keeps jumping :P could someone tell me what all those little settings should be set at?...Tue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t586762-turntable_skips_during_playbackI have 2 Technics Mk1200 M3d turntables. They're about 8 years old. I just got new Ortofon Concorde DJ cartridges and some pretty sick new vinyl... I've never had any problems with my gear up until the past few days... Almost every record I play,...Tue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t166718-technics_turntableI have a fault with a Technics Turntable model # SL-1200MK2. When playing a record, the two lights on the unit, red and clear, both flicker kind of with the music and the speed of the playback is changing constantly. Is this a simple fix or...Tue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t238885-replace_phono_leads_technics_1210alternativly if you dont reccomend me doing it can you reccomend anywere in uk that pick up, fix and deliver back? please help im on mono decks at the mo?Tue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t563259-sound_way_lowI just got the turntable and after I hooked it up, it plays, but I have to turn the volume on my system all the way to hear it. If I had that volume when I switched the recevier to the CDplayer or TV, or anything else, it would be so loud that I...Tue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t561341-just_picked_upHi, just picked up the USB Turntable from ION and installed it onto my Windows XP PC. The turntable is set to 33rpm, but my ablum is still spinning too fast, making the songs sound like Alvin the Chipmunk is singing. How do I slow this down? Thanks,...Tue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t535792-1200_making_loud_buzzing_noiseMy turntable is less than a year old. When I turn on the table theres a loud buzzing under the plater. It sounded like the "transformer" so I unplugged the table and took off the cover. When I pushed down on the large square box the noise went away...Tue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t537817-replacehow do I replace the belt on a mt-6410 turntableTue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t539428-ve_knocked_start_button_off_1210s_brassHi..Ive knocked the top black plastic bit off the start stop knob on my decks...1st time in 20yrs so about time i did some damage. Inside, I can see the brass post that i assume was holding the plastic lid on, has dropped into its shaft...any help on...Tue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t506715-loose_wobbly_platterThe platter wobbles a tiny bit when pressure is applied - the platter sits on the spindle apparatus just fine, it looks like the spindle itself is loose. Will some screw tightening do the trick, or does it sound like a more involved problem? Thanks!Tue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t511760-record_player_beltI have an Technics SL-23 record player and the drive belt has fallen off it's track. I cannot find a belt diagram anywhere to place the belt back where it belongs. Can you please help me with this? Thank you, Scott SchenkTue, 07 Oct 2008 07:25:38 GMThttp://www.fixya.com/support/t514438-smoked_small_parts_power_circuit_afterAfter replacing the light and powering the unit up it smoked a little and wouldnt come back on...I used the volt meter to check all circuits and all are goot but there are two small black parts in the power section of the board in the lower left part...Tue, 07 Oct 2008 07:25:38 GMT