Epson Perfection V100 Photo7/06Epson Perfection V100 Photo - 7Removing Dust From Photos, Film, or SlidesUsing the Dust Removal feature in Epson Scan’s Full Auto, Home, or Professional Mode, you can virtually “clean” the dust marks from printed photo, film, or slides as you scan them. For detailed steps, see the on-screen User’s Guide.Fixing Backlit PhotosUsing the Backlight Correction feature in Epson Scan’s Home or Professional Mode, you can remove shadows from photos that have too much background light. You can fix printed photos, film, or slides automatically as you scan them. For detailed steps, see the on-screen User’s Guide.Note: Backlight Correction is not available in Full Auto Mode.Reading the Status LightIf an error occurs, the scanner stops operating and the status light flashes red. This indicates the scanner is not connected to your computer properly or your software is not fully installed. See the Start Here sheet that came with your scanner for instructions on installing the scanner software and connecting the scanner to your computer.After trying these solutions, unplug the scanner, then plug it back in.If the scanner light is still flashing:o The scanner may be malfunctioning.o The scanner lamp may need to be replaced.Contact Epson. See the on-screen User’s Guide for details.Full Auto ModeHome ModeProfessional ModeHome ModeProfessional Mode
Wiz