20 Most Recent
Bushnell X-500 Rangefinder Questions & Answers
I have a Yardage Pro (that is the name on the
This is one can be a couple of problems......One, make sure you are not using HEAVY DUTY batteries. (use only alkaline batteries only) (duracell or energizer) Two, if you have dropped it or it is in a vibration situation.....stop it. (the compartment in the golf cart, bouncing around can cause this too...) Or it just needs an alignment. Sounds like you have a Yardage Pro 450....IF you have a 20-0400 20-0500, 20-0600, 20-0750, 20-880, 20-1000, bushnell doesn't repair these models. They will offer you a new model. If it is a 20-1916. 20-2018, 2020, 20-2025 they will repair those.
Alignment is 30 bills. If you have oily yellow looking spots (sunlight burns) the LCD is 15 bills. All other maintenance performed is 15 bills.
good luck
mtg
Wrong type of measurement showing
On most of the bushnell units you just hold down the MODE button for about 5 seconds and the unit should switch from yards to meters....or vice versa
Eyepiece assembly bushnell telescope
You never told us what model number or telescope TYPE you own. Is this a refractor or a reflector. ???
If a REFRACTOR usually you have a diagonal, the diagonal goes into the focuser and then the eyepiece goes into the diagonal.
On a REFLECTOR the eyepiece goes directly into the focuser.
Bushnell Tour v3 laser rangefinder will not display yardage
Hi,
Please shutdown your device for 5 minutes, booot up and then check for yardage again. If this does not work, then you might look into the device manual (in troubleshooting) to check for an alternative approach to fixing this. Thank you.
Not finding what you are looking for?