Technical Support, Instructions & Repair Service

Back to: All Products > Fein > Multimaster Rs - Msxe 636 - 2 Rs

Troubleshooting Fein Multimaster Rs - Msxe 636 - 2 Rs, Support & Service

Post a new problem    View unsolved problems

Solved Problems

RPM will start to slow and then almost quit
I have only used this 3 times and it is new. I started using it today and when you turn it on it goes back and forth in...
1 Solution
not oscillating
multimaster runs but no oscillating action.
1 Solution
How can i Replace a drive belt of my vacuum?
How can i Replace a drive belt of my vacuum?
1 Solution
I have a feeling the original problem was a result of vacuuming up dog hair...
I have a feeling the original problem was a result of vacuuming up dog hair (I have 2 huskies), but I always kept the...
1 Solution
Hoover model 5906-900 spinscrub
The brushes have stopped moving, what can I do? The machine still works, sucks etc. Just doesn's scrub anymore. Thanks...
1 Solution
nutone vx550 vac problem
i have a nutone vx550 central vac system that keeps shutting off while using it. i replaced the bag and it still shuts...
4 Solutions
no suction
no suction
1 Solution
Unable to Extract Water
I am able to shampoo but the unit is not extracting the water from the carpet.
1 Solution
wet dry vac suction not woking
Was left with water inside possible filter damage? Mold? water coming out blow hole and little to no suction.
1 Solution
Doesn't suck
I have a Hoover Empower. The motor runs, but it is not sucking anything up and the brushes aren't rotating.
1 Solution
belt to order for vaccuum cleaner nozzle
electrolux power nozzle model 1693. came as part of electrolux epic 6000 sr canister vaccuum cleaner (1992). what belt...
1 Solution
low suction
Have a Powr-Flite PF 18, suction is good at motor, but low at where hose comes out of top of vacuum. Could new lid seals...
1 Solution
Hoover Wind Tunnel Upright Self-Propelled
Hi, I have the above vacuum and I have LOTS of suction with the hose and absolutely NONE with the upright. All belts are...
2 Solutions
Power brush SEB234/236
Went too close to a shoe, power brush grabbed a shoelace and jammed. Now it doesn't run. Power light goes on and off...
2 Solutions
Miele Vacuum Cleaner
Have a Miele 700 which will not run. Power light shows but on preesing "Run" switch this goes out but...
2 Solutions
[1] 2 3 4 5 6 7 8 9     Next

Sponsored Links

Loading problems.

Repair Service