http://www.fixya.com/support/p513864-bosch_hcbg500_5_pc_industrial_hammerSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comFri, 25 Dec 2009 23:04:58 GMT80http://www.fixya.com/support/t879930-sander_runs_up_speedsander runs up to speed ok ,but any load applied to disc and it slows down to a stop ,plenty of speed but no torque .tried new brushes ,but this had no effect.Fri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t2395010-no_powerI have a corded Bosch hammer drill and when i squeeze the trigger, nothing happens. is there an internal fuse or another suggestion?Fri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t889432-gets_very_hot_smokeswhile i am using it the drill get hot and starts smoking, therefore i have to stop using once that starts going onFri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t855802-drill_starts_drilling_as_soondrill starts drilling as soon as i insert the batteryFri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t184324-bosch_gsb20_2re_drillWhen I purchase my bosch drill the reverse trigger is back to front. When it is in reverse the drill is going clockwise and when reverse is off it is going anticlockwise the opposite to how is should be. I thought I would put up with it but it is...Fri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t230287-interneteverytime i go to sign in to anything on computar it comes up the page cannot be displayedFri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t221758-throwing_oilI own a Bosch "Bull Dog" hammer drill, model #11228VSR. I loaned it to my neighbor a few years ago and noticed later that it now leaks oil out around the rubber gasket near shaft. I believe he over heated something. It still works, but when it warms...Fri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t432419-repair_service_bosch_1_1_4_hammer_drillWhere can I get it repaired?Fri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t976635-drillhow do I add fluid cleanly in a way that wont harm the tool?Fri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t2830271-screw_in_chuck_unknown_sizeHow do I remove the screw to change the keyless chuck on a 1/2" B&D hammer drill? I don't seem to have any tool that fits the screw.Fri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t2843129-after_replacing_switch_wired_exactlyafter replacing switch, wired exactly the way the diagram shows, drill runs opposite direction as handle show, model 0141-1, wired per diagram 58-01-0019Fri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t3068219-keyless_chuck_locked_turnkeyless chuck is locked; won't turnFri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t976631-drill_troubleshootingwhat maintance measures are to be considerd while owning an hydraulic drill?Fri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t2327674-keyless_chuck_start_drilling_headkeyless chuck. start drilling.the head stop, but if i take the drill out of the screw it will turn again. ive puty my hands on the chuck held it , started the drill and the head does not seem to turn.?Fri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t2487700-two_year_old_black_decker_model_cd180sMy two year old Black and Decker model CD180S cordless drill "went up in smoke" while drilling with a 3 bit in pine. Is it repairable or disposable. It is not a number included in the recall.Fri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t2685231-fit_drill_bit_drillhow to fit drill bit to drillFri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t2692341-vsr_drill_18v_cordless_type_adaptori have vsr drill 18v cordless.what type of adaptor do i need to useFri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t2812305-procedure_removing_chuck_fromwhat is the procedure for removing the chuck from a makita 6095D 9.6v drill?Fri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t2077383-need_know_gears_fit_in_gear_boxI have a 6347-d Makita cordless drill that was dropped and I am replacing the yoke but in the process I slipped and all of the gears fell out of the gear box. I need a schematic of the way the gears fit in there. Thanks.Fri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t2318270-one_makita_drill_new_but_front_partI have one makita drill new.but the front part of my drill .is not work , because not hold anything...I thing the shock is bad......model is bhp452 makita drillFri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t1028168-extractor_fan_in_ensuite_leakingThe small extractor fan in my ensuite seems to have been leaking from day one and is all grey around it. What to I have to check? It runs up into my attic and out. What safeguards do I have to take to prevent it happening again. And do I have to use...Fri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t1064624-brushesHi Is there a way of telling if my drill brushes are worn.is there a minimal length of the carbon Thanks John Feel free to ask any gas appliance questions as that is my trade(especially gas boilersFri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t2941016-use_impact_drillhow to use an impact drillFri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t2856428-cannot_get_keyless_drill_chuck_offcannot get keyless drill chuck off . this is Skil 6260 corded drill. It is stuck closed.lFri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t3113006-changing_drill_bitsI miss placed my manual and can't remember how to change the drill bits. Your help would be greatly appreciated. thanks in advance, Anne.Fri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t3493748-wagner_cordless_drill_charger_notwagner cordless drill ,the charger is not charging the drill the orange light keeps flashingFri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t3317810-dewalt_dw990_left_out_in_rainmy dewalt DW990 was left out in the rain and has now siezed up.I cannot remove the chuck to dissassemble itFri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t976634-drill_problemWhy do hydraulic systems overheat?Fri, 25 Dec 2009 23:04:58 GMThttp://www.fixya.com/support/t3057398-awning_motor_just_humsSomfy 532 motor just hums and not turning. (176in/lbs @ 16rpm) They said it's an older model not repairable because the capacitor is in the middle and soldered in place. Does anyone repair these ? It's my fathers at 82 and doesn't have $617 to buy a...Fri, 25 Dec 2009 23:04:58 GMT