20 Most Recent EliteGroup 945GZT-M (V1.0) Motherboard Questions & Answers

Your current CPU won't fit that board,your processor is a socket LGA775 and the motherboard you listed is a socket LGA1155, also called Socket H2, here's a link to several boards that you can use your current CPU in and that also supports ddr3 memory,hope this helps.


EliteGroup... | Answered on Jul 02, 2017

if it goes in then it will fit measure the board from tower then the board you want

EliteGroup... | Answered on May 18, 2014

Yes it can support it. It supports all models of intel dual core processors.

EliteGroup... | Answered on Dec 03, 2013

try a new video card or a monitor

EliteGroup... | Answered on Oct 26, 2013

Hello here is the cpu list, for the asus board:


Here is the msi site:


Your current cpu will not fit on the msi board, because it is a different socket.

The asus board has socket LGA 775, and the msi board has socket 1155.

You have to buy a new cpu for the msi board, to make it work.

Here is the cpu list:


If you want to keep the socket 775, you probably have to find a used mainboard, because this socket type is phased out.

Some online stores still have this mainboard type available, but a new mainboard will have the DDR3 ram socket.

Good luck

EliteGroup... | Answered on Feb 13, 2013

The driver is only for vista.

Download here:


Take care of 32 or 64 bit version.

EliteGroup... | Answered on Oct 20, 2012

i dont know what this driver is or what its used for cherche driver 945gz/ct-m
on the home page you should see a search tab just type in what you are looking for
(be precise)also the download software finder under that there will be a list place a tick in the box of any one you want/need
all software windows software mac software mobile and web apps


also this link will provide you with many freeware and share drivers

hope this helps you

EliteGroup... | Answered on Aug 05, 2011

You will find the download link in the middle part of the following page. http://www.bioticaindia.com/pi945gzd.html
Good luck!

EliteGroup... | Answered on Aug 03, 2011

hello my brother you can download all your drivers from here and for free then go to drivers backup then do like in the page .
or from here

EliteGroup... | Answered on Jul 23, 2011

If you have no display its usually either a video card or motherboard problem, since your on a laptop its probably a motherboard problem. The cost of replacing the motherboard will be about the same as a new laptop looks like you'll probably have to buy a new one.

sorry to disappoint you


EliteGroup... | Answered on May 13, 2011

If the RAM and the processor are ok , and you have tried booting  to BIOS with all oter devices removed and it has also failed, then the only thing left is the motherboard - it's dead, junk it.

EliteGroup... | Answered on Jul 08, 2010

Yes ur motherboard support the processor u can use it

EliteGroup... | Answered on May 22, 2010

Yes you can.
Your motherboard is LGA775 socket and supports the folowing processors:
Core2 Duo / Pentium Dual Core (yours) / Pentium D / Pentium 4 / Celeron 4xx series/ Celeron D.

EliteGroup... | Answered on Jan 29, 2010

Yes it supports all models of dual core processors.
e5400 has the same socket as your motherboard does so they are compatible.

EliteGroup... | Answered on Jan 28, 2010


Here is the full CPU compatibilty for this motherboard.

945GZT-M CPU List

Thanks for using Fixya.

EliteGroup... | Answered on Oct 19, 2009

plz open your motherbard drivers cd and go to the utility folder ansd then upgrade u r bios

EliteGroup... | Answered on Aug 28, 2009

You may have to replace the BIOS chip, if it is removable. Contact ECS for a replacement chip

EliteGroup... | Answered on Aug 06, 2009

remove ur power supply socket from the mother board short the pin green and black in the connector if the smps start no problen with the power supply then the problems lies with ur mother board wiring or fault in your mother board if your mother board has secondry power fix it correctly to mother board sock et with has 4 pin if its not working cousult a chiplel engineer the fault lies in the power supply of the motherboard

EliteGroup... | Answered on Apr 06, 2009

No it wont take 800MHz RAM...

Using the DDR2 slots u can have 400MHz sticks (rare stuff), or 533MHz sticks

Using the DDR1 slots u can have 333MHz or 400MHz

Let me know...

EliteGroup... | Answered on Jan 20, 2009

Not finding what you are looking for?
EliteGroup 945GZT-M (V1.0) Motherboard Logo

40 questions posted

Ask a Question

Usually answered in minutes!

Top EliteGroup Computers & Internet Experts

Alun Cox

Level 3 Expert

2679 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers


Level 3 Expert

13434 Answers

Are you an EliteGroup Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

EliteGroup Computers & Internet

  • EliteGroup Computers & Internet

Most Popular Question

sm bus controller driver

  • Computers & Internet