20 Most Recent
OKI B6500 Led Printer - Page 2 Questions & Answers
I have a Oki b6500. Replaced the fuser. How to
The following procedure was provided by Oki Tech support when a web search did not provide an answer. Resetting the Fuser After Replacement - When Counter is NOT Reset
First print out a MenuMap and note the fuser count, to later verify that the maintenance reset has taken affect.
To reset the fuser counter, enter the diagnostics mode and go to Maintenance Mode
Step-1 How to enter the maintenance mode.
Hold the Menu & Right arrow button while powering on the printer. Hold the buttons down until the op panel displays “Initializing”.
The op panel will display “Output Test”
Step-2 Press the down arrow three times.
The op panel will display “Maintenance Info”
Step-3 Press the right arrow.
The op panel will display “Reset Maint Reqd
Execute”
Step-4 Press the select button.
A quick flash will come up on the op panel “Resetting Maintenance Reqd”.
The op panel will then display “Reset Maint. Reqd.
Execute”
Step-5 Press the Cancel button to exit the Maintenance Mode and go back to “Online”.
This completes the process, please print out the Menu and inspect the Fuser Count it should read ‘0.’
Not finding what you are looking for?
