http://www.fixya.com/support/p506841-samsung_clp_300_laser_printerSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comSun, 20 Dec 2009 04:47:47 GMT80http://www.fixya.com/support/t3617862-red_light_wont_printredlight on .wont printSun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3654498-often_get_red_status_light_samsung_clpI often get a red status light on Samsung clp-300. Pulling out the print drum fixes problem for a number of pages. No lights for the color show up when I turn it on and it stops.Sun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3641589-samsung_clp_315w_printer_softwarei have a samsung clp 315w printer, software loaded ok on desktop pc with windows xp and my wifes laptop with xp, when i try and load software onto another laptop with vista i get various messages like invalid arguments. Any advice would be...Sun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3623540-red_light_back_printerThe Red light is on and the back of the printer is far too hotSun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3601248-need_paper_feeder_belt_knowneed the paper feeder belt. do you know where can get one?Sun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3598226-test_page_faided_in_middleTHE TEST PAGE IS FAIDED IN THE MIDDLE AND WE HAVE JUST CHANGED THE BLACK CARTRIDGE WHAT ELSE MUST I DO?Sun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3589896-even_new_black_cartridge_printed_copyEven with a new black cartridge the printed copy is faint and streaky. The printer is 1.5 years old. How can I fix this. Do I have to somehow clean the printer?Sun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3587512-printer_will_not_feed_paper_from_trayMy printer will not feed the paper from the tray.Sun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3585492-prints_very_feintthe prints are very feint tonot visible. There is ink in the cartridges.Sun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3566477-light_flashing_change_yellow_toner_donelight flashing to change yellow toner - have done so with correct samsung ink still flashingSun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3569926-red_light_printer_wouldnt_workRed light was on, printer wouldn't work. Finally figured out the toner waste container was full. Emptied it, printed about 10 pages, now the lgiht is on again and it won't print. Goes through the warm up process, but red light comes on immediately...Sun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t562199-waste_tank_full_solid_red_lightOn my Samsung CLP-300 (which is only a couple months old), every few pages I print I get a solid red light. When I run the "Dr. Printer" utility, it tells me that the waste tank is full. I pull the waste tank out and empty it. Do I need to get a new...Sun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3525530-when_switched_goes_its_warmupWhen switched on and it goes through its warmup routine before it abruptly stops and does not allow printing. Is there anything I can do or does it need technician.Sun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t1402565-samsung_say_transfer_belt_errorSamsung Printer: My Samsung printer is showing Transfer Belt ErrorSun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3527331-new_toner_cartridge_but_will_not_printnew toner cartridge inserted but still will not printSun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3517003-colour_prints_out_fine_but_black_fadesthe colour prints out fine but the black fades in various area accros down the pageSun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3524346-clp_wont_print_black_properlyCLP wont print black properly, it prints on RH side, but not on left. Have fitted anew cartridge, no change. ThanksSun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3521182-printer_recently_started_printing_veryMy printer has recently started printing very light (hardly readable). All toner cartridges are full and the printer self check shows no errors. It appears the toner jets are restricted. This problem exists across the whole page but is worse in some...Sun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3514695-now_status_solid_not_blinkingnow the status is solid not blinking and we checked the toner.Sun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3514470-status_red_button_blinking_wrongThe status red button is blinking What is wrong?Sun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t1612129-samsung_clp_500_paper_feed_rollerThere are 2 tires on one shaft and a spring. Releasing the white clip on right hand side (like HP) does nothing useful. I expect I'm going to have to take off the LHS side cover and go from there- anyone got any ideas or visuals for help- thanks DonSun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3472156-back_rear_panel_quite_hot_ubit_will_notthe back and rear panel is quite hot and the status light turns red after a short period and the unit will not printSun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3485045-paper_feed_not_straight_straightPaper feed seems to be slipping so that the paper is printi ned at an angle.Sun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3482159-samsung_clp_300_giving_error_fullMy Samsung CLP-300 color laser printer was giving an error of a full waste tank, so i replaced it. I have cleaned the light sensor. It will start to print and then draw paper in and then give an error with a solid red LED. I have no idea what is...Sun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3455384-both_red_lights_continuously_flashesBoth red lights are on continuously - flashes green on startup - then to both reds - printer hardly used - HELP! CLP_300Sun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3467121-cancel_printing_clp_300_printerHow to cancel printing for CLP-300 printer?? I double clicked on the icon on tray, but don't see a print queue.Sun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3469184-printer_clp300_goes_red_statusHi, my printer (CLP300) goes to Red status indicator almost directly when powered on. It's sound as it tries to set the paper feed and fails. - How can I solve this? I've tried to restart hundreds of times, changed paper, checked tray for jam......Sun, 20 Dec 2009 04:47:47 GMThttp://www.fixya.com/support/t3443584-red_status_light_flashing_but_nonered status light flashing, but none of the toner colours are litSun, 20 Dec 2009 04:47:47 GMT