when i turn on the printer, the green on button flashes. this problem just started. it has paper in...
(More)
WHEN I TURN ON THE PRINTER, THE GREEN ON BUTTON FLASHES. THIS PROBLEM JUST STARTED. IT HAS PAPER IN IT AND CARTRIDGES ARE GOOD. IT WILL NOT CLEAR TO PRINT
HP Deskjet F2180 printer gives error message: ''cover open''. The cartridges are stuck in the...
(More)
HP Deskjet F2180 printer gives error message: ''cover open''. The cartridges are stuck in the middle of the track and the orange RESUME button is blinking. None of the other buttons respond. Please help.
why i can't print. It say the cartridge have a problem when i start to print. Also when i want to...
(More)
why i can't print. It say the cartridge have a problem when i start to print. Also when i want to print it my work, the catridge will stuck. And then i check the printer properties it say the printer is offline but my printer still connected. My printer is HP 2360 and i using continuous ink. It that true my printer or my cartridge already damage.
i had opened the cover and all its spares and i have also re joined them and it has worked...
(More)
i had opened the cover and all its spares and i have also re joined them and it has worked sucessfully many times, but this time while opening the plastic sense wheel for the opto copolour. its prints has got erased so the printer is in error state can any one help me out to get the spare number or the spare. if any body has solution to me can mail me at aaseef.k.z@gmail.com
when installation is goin' on. a problem error then occurs saying NtPrint error and usbPrint.. there...
(More)
when installation is goin' on. a problem error then occurs saying NtPrint error and usbPrint.. there is a fix button but then if you click the fix all or fix button the whole process then became error. if you retry it it can't be fix anyway.. can you help me with this? pls
When I give the command to print, the print head slams to the end of track and gives a jammed error....
(More)
When I give the command to print, the print head slams to the end of track and gives a jammed error. I hit the reset button and it takes a few seconds while cleaning print head then does it again ... again I hit the reset button and after it cleans print head again... it prints fine... just have realign often. once I get it printing it is fine for about an hour then we go thru it all again, and it always takes two reset tries to make it work... at least it is consistant.. any suggestions? I also would like to know how to disable printer status popup window that comes up all during my multipage printing projects ... what a pain to keep tell it I know it is ready...