20 Most Recent
Questions & Answers
While trying to clean ink that leaked on the inside of my printer I've managed to knock loose a spring
I repair, or at least, try to repair ink jet printers. The problem of why many inkjet printers have a short life, is that they do get gummed up with ink goo. There is a home position where a large sponge soaks up ink from the print head as a way to purge the ports. Over time (like a year or two), this sponge and the surrounding carriage assembly, gets covered in half-dried up ink. The print head passes over this area and inevitably gets gooed up. Instead of trying to replace a spring. May as well replace the printer.
on Feb 14, 2014
Printing blank pages
Press Test Page button on ur printer to check if there is issue with the software or printer.
If print test page is returning a printed page it means there is some problem in software communication with the driver.
on Oct 22, 2013
Blocked cartridge on my c3150 hp printer
Inkjet printers need to be used frequently to prevent inkdrying out and blocking the print head nozzles.
If the print head cleaning maintenance routine does not clear the blockages,then print head needs replacing, but it may be expensive.
It may be more cost effective to buy a later model and better printer thanreplace the print head.
on Jul 08, 2012
My hp photosmart c3150 just prints blank pages
Turn the printer on and off. Disconnect the usb connections and restart your PC.
Turn the printer on and try printing.
Check the cartridges.They maybe low on ink or even dry.
If the cartridges are fine,remove the black cartridge from its slot on the right and check its nozzles for damages.Make sure the plastic tape usually on it when new has been fully removed.Slide the cartridge back into the slot and push it forward till it clicks.Please do the same with the other cartridge.
Remember to replace any used cartridges.
Hope this helps.Thanks!
on Oct 13, 2011
My printer will not print.
- Check the status of your printer by moving to printers and faxes on the start menu.
- Is it checked?Are there any queued print jobs?
- Turn off both the printer and your PC.Remove the usb connections.
- Unplug them completely from power.
- After a few minutes connect them again.
- Try to print.Cant print?
- Uninstall printer[hoping you have installation disk] and install it again.
- Make sure the selected ports on pc and printer correspond.
- After installation restart your pc.
- Now you can print!
on Sep 20, 2011
Not finding what you are looking for?