The problem:Press the power button and the led turns blue, but nothing happens. I figured out that if i unplug the set then plug it back in it worked....
written by stiv0
my top tip of the day is ..... videos ,if your video player is playing up then try switching it off and on or get a new one it is entirely up to you.
written by sharna banna
Hello to all well here are some tips that may help you determinate what is the main problem of your T.V'S 1- If you put you hand on the top of your...
written by saidneurot
Ok lets just say you wake up one morning and the screen on your lcd tv set does not want to turn on, outside it is cold.The tv set turns on but the...
written by livep9
Considering the whole goal of television salesmen is to have us return to buy more televisions when the old ones give out, perhaps we shouldn't trust...
written by zabedav
If you find that your Apex TV is showing a blank screen with a red key on the bottom left then the Screen Lock otherwise known as Child Lock or...
written by RixsFixes
If you hear a relay clicking all the time when you turn your plasma TV on is often just a few capacitor and resistor to replace. Cheap and every body...
written by wings_it
This is to help explain the short lives of Lamps. WARRANTY: If a lamp fails within the first year replace Lamp and Ballast. If Lamp explodes do not...
written by BIG IRISH
For the 44" LG DLP model RU44SZ63D...press and hold the menu button the remote control until a four digit password is requested on the screen....
written by mlapres
the newer tv are just computors in disguyes.they often won't come after a power surge and have to be reset,you must unpluge from the wall and wait 10...
written by bsddog87
If you are trying to clean a LCD or Plasma screen, use only recommended screen cleaners. Be very careful not to rub too hard or contrast coating may...
written by edcor
What to do if you have an all snowy picture, blue screen or the TV displays unusable signal, no signal or no sync. When using a Satellite receiver or...
written by johnnydiode
a) basically it has to be acted upon by a supply voltage of at least 95V to work. b) of course, assuming the horizontal deflection oscillator works,...
written by palaboy