20 Most Recent
- Page 2 Questions & Answers
The remote for m Akai
First of all you need to check whether there's a signal coming out from the IR or infrared sensor of the remote. How to check? Use your phone camera or any video cam device. As you watch the remote from your camera facing the IR sensor, press any button. If there is a signal coming out from the remote, you will see the IR sensor illuminate from your camera.
If you find no illumination, then first to do is to check the spring where battery is connected. Remove any corrosive or residue from the old battery on the plate or spring where battery is connected.
If there is illumination, then the problem is the IR sensor of your TV. The most common problem and solution for this is to resolder the terminal or solder joints of the IR sensor inside the television.
Please post back if you need further help.
Thank you for using Fixya.
on Aug 30, 2010
Need setup codes for Akai KC01-B2 to run with comcast remote
I recently bought a used LCT2060 that had no remote. I figured my
comcast cable remote would work without a problem but it didn't. So 3
universal remotes later I found my solution...a radio shack
universal gamer remote. It controls up to 5 components plus your
xbox360, playstation and pc. The price on sale was a mere 12.97, not bad
if you ask me. Hope this helped. The code that worked for the Akai
was 11676. Take care...
on Feb 18, 2010
Not finding what you are looking for?