Top 20 Apple iPhone Smartphone Questions & Answers

Tip

Apple iPhone Factory Reset


I show how to do a factory reset on your iPhone.

on Jul 06, 2017 | Apple iPhone Smartphone


the phone is good but phone application is not working so you have to go to service center to resolve

Apple iPhone... | 746 views | 0 helpful votes


I would recommend plugging into iTunes and backing up your phone. After you back it up, restore the device. Set up as new and test it. If the issue is resolved you can restore from your back up. If the issue comes back then you will need to set up as new

Apple iPhone... | 292 views | 0 helpful votes


Your battery has gone to battery heaven - get a new one.

Apple iPhone... | 140 views | 0 helpful votes


Hello,

To change the brightness of your camera you need to swipe up or down with 1 finger. If this doesn't solve the problem please contact me.

Sincerely,

Hicham Ghaleb

Apple iPhone... | 48 views | 0 helpful votes


if it boots normally and you can still use it thats no big deal, unless it hangs out while in logo

Apple iPhone... | 88 views | 0 helpful votes


The iPhone's capacitive touch screen doesn't have the concept of calibration.
To fix the problem you're experiencing, I suggest trying each of the following options:
  1. Hard reset of the phone by holding the Home and Sleep buttons for 10 seconds.
  2. "Reset All Settings" from Settings ? General ? Reset.
  3. "Erase All Content and Settings" from Settings ? General ? Reset.
  4. If your phone is still under warranty or covered by AppleCare, bring it to Apple and they will repair or replace it for you.
  5. If not covered, then there are guides for replacing the front panel (first-gen iPhone), which contains the digitizer.

Apple iPhone... | 687 views | 0 helpful votes

Tip

How to fix iPhone 7 frozen touch screen


Recently, I have seen several cases that their touch screen of iPhone 7 was no response/unresponsive, it is like being frozen. It makes a lot of troubles for those who have this problem. So, Vipprog wrote a wizard for this problem.
Step 1
Uninstall some troublesome Apps. Some apps that use actions on your touch screen may slow down your screen's working and you may receive some lags while operating your touch screen. If this is the cause for your frozen screen, then reinstalling the appor another app replacement will probably fix all the issues with your touch screen.
Step 2
Remove the case or screen protector (VC493) on your device, which might cause the screen not able to react to all of the sensitivities of the touch of a finger like it normally would.
Step 3
.Try to clean the screen (VC743) with a soft, slightly damp, lint-free cloth. It is best to wipe in a circular motion.
Step 4
Restart your device, which is considered to be the best and quickest method to solve the problem. If you can't restart it, you can force restart your device by pressing and holding the home button and the reset button on the top of the phone for a full 10 seconds until the phone resets and the Apple logo appears on the phone.
Step 5
Resetting your phone to its original settings, you can easily do it by simply connecting your iPhone to your computer and doing its reset using iTunes. If the iPhone 7 touch screen is still not working, move to the next solution.
If none of these steps work, then the issue may be related to physical screen display defects, in such case, a broken screen repair or LCD repair could be a perfect solution.
Note
1. Make sure to unplug your device when performing all the operations.
2. Make sure that your hands are clean and dry before starting all the operations. Any kind of moisture can affect the way the touch screen operates. Moisture sometimes slows the response time from the screen to the operating system.
Original universal programmers Online Shopping Store from China
For iPhone 5 5s 6 6p 6s 6sp LCD Display Touch Screen iphone LCD Assembly

on Jun 14, 2017 | Apple iPhone Smartphone


hy,??,????????iphone?????,????????????,???????(vipprogrammer.com)????DIY????,?????????,Sim card slot has a lot of fake catarrh.

Apple iPhone... | 196 views | 0 helpful votes


hy,??,????????iphone?????,????????????,???????(vipprogrammer.com)????DIY????,?????????,

Apple iPhone... | 131 views | 0 helpful votes

Tip

How to repair iPhone 6 display no service and no IMEI when dialing "*#06#"


Do you feel curious why the iPhone 6 will not be able to display IMEI when dialing "*#06#" after falling down? But have to be aware of is "about phone" can shows it. So, what's wrong with your iPhone? Vipprog answer for you.

First you have to know where the problem is. This kind of trouble is caused by RFFE bus of the baseband that does not work. In most cases of dropped iPhones, the circuit of pin U1 of the baseband CPU is disconnected. The location of pin U1 is shown in picture 1-1.

To solve the problem that dropped iPhone displays no IMEI when dialing *#06#, first remove baseband CPU to check whether the pin U1 comes off from the solder pad. Then measure the iphone diode data of U1, U2, U5 and R5.

After teardown iPhone, remove baseband CPU, we can find pin U1 and pin V1 come off from the solder pad, as shown in picture 1-2. This iPhone shows no IMEI when dialing *#06# because when pin U1 comes off, baseband CPU cannot communicate with peripheral circuit.

Above all scrape the circuit that is connected to the pin U1 and V1 on solder pad, as shown in picture 1-3.

Then plate the welded joints of U1 and V1 with tin and place two enameled jump wire on the solder pad of U1 and V1, as shown in picture 1-4.

At last, paint green UV Solder Resist on them and reassemble baseband CPU. The signal becomes normal after power on, so the trouble is removed. You can normal use the iPhone again.

example4-1-oqcuovfrytrt5spcete0fozx-5-0.jpg
1-1

example4-2-oqcuovfrytrt5spcete0fozx-5-2.jpg
1-2

example4-3-oqcuovfrytrt5spcete0fozx-5-5.jpg
1-3

example4-4-oqcuovfrytrt5spcete0fozx-5-9.jpg
1-4
Original universal programmers Online Shopping Store from China For iPhone 5 5S 6 6S A5 A6 A7 A8 A9 baseband CPU U0201 chip iphone 6S 6SP D4020 D4021 diode L4020 L4021 backlight coil Mechanic UV Solder Resist PCB UV curable solder mast Green UV Fluxes Oil...

on May 24, 2017 | Apple iPhone Smartphone


fix your LCD.

Apple iPhone... | 122 views | 0 helpful votes

Tip

How to disassemble and reorganize iPhone 7



It is good for you to know how to disassemble and reorganize your iPhone 7, just in case. However, it is need many of phone repair tools to finish this engineering. Fortunately, now is the internet age, you can buy anything through the internet. Now we list the phone repair tools we need, they are phone opening tool, SIM card eject pin, tweezers, knife set and different types of the screwdriver. If you want to quickly find high-quality tools ,maybe you can try Vipprogrammer.

when you prepared all of phone repair tools you needed, then we can start.

1. Turn off your iPhone 7.
2. Pop up the Nano-SIM card tray.
3. Using screwdriver to unload two Pentalobe screws beside the lightning connector.
4. Carefully disassemble the cable and liberate the iPhone 7 display assembly from the phone.
5. Take out the stereo-enabling speaker and teardown the Front-Facing Camera Cable Assembly of iPhone 7.
6. Carefully extract the battery.
7. Pry the rear-facing camera out of the chassis and digging the iPhone 7 logic board out of the rear case.
8. Know down the iPhone 7 loudspeaker.
Finally, remove the last component which contains the power and volume button switches, LED flash, a microphone, and the ring / silent switch. When iPhone 7 power and volume buttons are nuzzled securely in the rear, just defying conventional removal.

The related link:
  • Original universal programmers Online Shopping Store from China
Electronics Accessories for Automotives chip programmers
2-revui3autwiuxj0slxzwjfus-3-0.jpg

on May 05, 2017 | Apple iPhone Smartphone

Tip

How to upgrade iphone 7 Plus 32GB storage to 128GB


Whether you still feel irritated for lack of phone storage? Anyway i am, so i have tried to expand my iPhone's memory to 128GB and now I've achieved it by a NAND Flash Programmer. I believe those who still want to upgrade their iPhone storage are want it too. Therefore, i share it with you.

User tips / warm reminder

1. This 2017 WL PCIE NAND Flash IC Programmer for iPhone 6s 6sP 7 7P 5SE / iPad pro.
2. It can repair Mainboard HDD Chip and NAND Flash error, modify the underlying data on NAND, Expand iPhone / ipad Memory Storage and so on.
3. It support mass write mode, save time.
4. Before using the software and operation, please install / update the latest iTunes software.
5. It needs professional to operate or maybe you can't use it.
6. There is a possible risk for the upgraded iPhone. If this technology was widely applied, Apple official may take some measures to stop this.

If you are ready, just follow the steps below

1. Turn on the switch button after you connect the WL PCIE NAND Flash Programmer with computer by using 2 data cable
2. Sign in the "WL Software", select the specific disk type "WL PCIE Disk".
3. Press to refresh the port and then "Open Port" to be prepared for data writing
4. Install the old Nand flash chip and press the reset button
5. Read and check whether the information queried is correct by clicking "All Data Query".
6. Through software at a regular path to "back the original data".
7. Remove the old flash chip and install a new one.
8. Press the "Reset" button, then select the specific model iPhone 6s, click "write bottom"
9. Click "Write all disk data" and write iPhone 7P data to a brand new 128G flash drive with the PCIE NAND Flash Chip Programmer.
10. Cheak if the data write operation was successful by "all data query".
11. Connect the new flash drive with the motherboard.
12. Reassemble the phone and restore iPhone via iTunes then activate it.
13. Test and verify upgraded storage.

Just be careful in operation. If you have more problems, you can go in Vipprogrammer.

The related link:
http://blog.rewatechnology.com/2016/10/upgrade-iphone-6s-16gb-storage-to-128gb/
00-fku3xmkh1wlv40j3wch0qrp5-5-0.jpg

WL PCIE 6S 7 7P NAND Flash Programmer iphone 7 7P NAND Test Fixture iphone... apple Charging Cable for iphone 5 5s 6 6p 6s 6sp ipad data cable Phone...

on May 06, 2017 | Apple iPhone Smartphone


Did you restore the phone and set up as new? or did you restore from a back up?

Apple iPhone... | 28 views | 0 helpful votes


Hi friend, if you not can charger with the apple's provide the plug.You can try use this fast wireless charger.It can help you fast for iPhone and fpr galaxy s6 Edge+, galaxy S7, S7 edge, note5
Hot Otao Fast Wireless Charger with Cooling Fan 2 Coil Wireless Charging

Apple iPhone... | 65 views | 0 helpful votes

Tip

How to Transfer Music from iPhone to Computer


How to Transfer Music from iPhone to Computer via IOTransfer
  1. Download, install and run IOTransfer
  2. Connect your iPhone device to IOTransfer via USB cable
  3. Click "Music" column, and you will see the list of all the music on your iPhone. You can select them all or some specific music files you want to transfer, then click "Export" to transfer the music from iPhone to computer. It's just easy.

on Apr 06, 2017 | Apple iPhone Smartphone

Not finding what you are looking for?

8,145 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Apple Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18386 Answers

Lesley Cameron
Lesley Cameron

Level 3 Expert

371 Answers

Are you an Apple Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

iPhone Apple

  • iPhone Apple

Most Popular Question

iphone wont charge

  • Cell Phones
Loading...