20 Most Recent Lexmark E450dn Laser Printer Questions & Answers


The way that I have found to fix this problem is to replace the logic board but when you do that, this is where the NVRAM mismatch comes in. Once you change the logic you also have to change the display op panel. That is what is giving you this error. You must change logic and op panel at same time and it will not give that error.

Lexmark E450dn... | Answered on Feb 22, 2019


Here's an article on Receiving a Paper Jam Message When Using the Front-loading Manual Feeder on a Lexmark E250d/350d/352dn/450dn. Click on this link: http://bit.ly/cWZVZo. Read thoroughly, you might get some tips on how to avert this problem in the future. If problem continues, I suggest you contact Lexmark technical support to further investigate the problem.

Lexmark E450dn... | Answered on Nov 08, 2016


This is a possible pick tire issue. Try to reverse the tires, turning it inside out. Fan the paper and adjust the tray guide. If that doesn't help, printer will probably require service. I suggest you contact Lexmark technical support or your authorized service provider. Thanks.

Lexmark E450dn... | Answered on Jan 15, 2015


935.10 error usually means dirty lens only. clean the lens with lint free cloth. do not use compressed air as it will force toner into the printhead assembly.

Lexmark E450dn... | Answered on Jan 15, 2015


re-seat all connections from printhead to controller card and all connections at the printhead as well this is a "hard" failure of the printhead . it is slightly possible it could be a bad connection . but it is probably the printhead itself which is bad ...

Lexmark E450dn... | Answered on Jan 15, 2015


Have you recently tried adding to or replacing the internal rem modules? If not they could have developed a fault. Try removing the and rebooting the printer see if that resolves the issue. I have also see this happen with a faulty daughter board which the ram plugs in to on a hp printer

Lexmark E450dn... | Answered on Jan 15, 2015


go into control panel or where ever you go and open printers and hardware. choose the printer, in the menu left topside. click on file or edit one of the choices has the cancel all documents. at least this is the only way I've been able to. good luck

Lexmark E450dn... | Answered on Nov 08, 2014

Not finding what you are looking for?
Lexmark E450dn Laser Printer Logo

114 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

E Lexmark

  • E Lexmark

Most Popular Question

error 935 10 service printhead error

  • Office Equipment & Supplies
Loading...