Technical Support, Instructions & Repair Service

Back to: All Products > Bissell > 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Troubleshooting Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum, Support & Service

Post a new problem    View unsolved problems

Solved Problems

no suction to retrieve water from carpet
watre/cleaner disperses on carpet but doeds not retrieve back into waste reservoir. Previous post by someone else was of...
1 Solution
Kenmore progressive canister
Hi there - My vacuum won't turn on unless the power brush is attached. When it does go on, there is no power in the...
1 Solution
Vacuum cleaner
We have a panasonic MC-E47electronic which seems dead. It has a speed control which we nearly always had on full anyway....
1 Solution
Shark Euro-Pro not powering up
Hi, I just purchased this today and used it 2 1/2 times. I followed the instructions to a tee, but when I was using it...
1 Solution
dyson dco5
Pulled the unit too hard to get extra flex. The plug is ok changed the fuse. I believe the cable has detached itself...
1 Solution
Polti vaporetto lux xteam cleaner
Can't get the cap of the generator tank. Says there must be no pressure before it will open - well, the machine is cold...
1 Solution
Dirt Devil Repair
Where can I find an exploded parts diagram for my Dirt Devil Reaction Dual Cyclonic (model # M110000)?
1 Solution
craftsman vacuum
I need to see a manual to get parts for craftsman vacuum model 11317060. Serial number 00259v2279
1 Solution
KIRBY G4 FAN ASSEMBLY ORDER
MY KIRBY G4 FAN WAS BROKEN, I JUST PURCHASE A NEW G4 FAN KIT. This kit includes a new fan, new pulley, new spacer, new...
1 Solution
Instruction manual for Eureka 409B
It's not picking up good. I cleaned all areas and still not picking up. I have no manual because it was given to me. The...
1 Solution
broken upright locking mechanism
This machine has a locking mechanism that locks it into the upright position. Yesterday this broke and a small piece of...
1 Solution
Removing obstruction from vacuum motor
Hello, I would appreciate advice on how to take apart my vacuum cleaner to remove a bolt that I believe is stuck in the...
1 Solution
NOT SUCKING WATER UP
NOT SUCKING WATER UP
1 Solution
dirt devil dual cyclonic bagless vaccum
There is suction on the vacuum, but the air directors won't turn, and therefore is not picking up anything..I've removed...
1 Solution
Previous     5 6 7 8 [9] 10 11 12 13     Next

Sponsored Links

Loading problems.

Repair Service