http://www.fixya.com/support/p49891-bissell_7901_1_proheat_scotchgardSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comWed, 09 Dec 2009 06:27:48 GMT80http://www.fixya.com/support/t3597695-when_using_bissell_proheat_7901When I was using my Bissell ProHeat 7901, I smelled something hot (almost burnt) and turned off the vaccum. When I turned it back on, everything seemed to be working, but the vaccum part was not making the same sound. The bristles are still turning,...Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t3596234-change_belt_brisselHow do I change the belt for the brissel?Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t3590464-bissell_doesnt_seem_vaccumming_asMy Bissell doesn't seem to be vaccumming as well as it was before. Not sure what the issue is. Could the belts be loose? They are on there, but not extremely tight. Should they be tight? The brush on the bottom seems to have a lot of play/bounce to...Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t3560169-having_trouble_reconnecting_hoses_afterhaving trouble reconnecting hoses after replacing the pump. an interior hose diagram would be helpful...Bissell pro heat model 7901Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t3032050-proheat_bissell_7901_stopped_pumpingHi my proheat bissell 7901 stopped pumping water to the floor, but it pumps water from the hand hose. I read the manual and followed how to check belt and the flat belt on right side of shampooer is fine and I turned on and it turns and so do the...Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t3505429-roller_in_front_seems_loose_nowThe roller in front seems to be loose and now the machine will not go forward. Since I don't have a manual I don't know what to try.Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t151519-replace_pump_7901_bissell_pro_heat_steamMy brush would not turn and I noticed that something red had melted where the belt was suppose to be turning. I took the part to my local repair shop and they sold me a replacement pump. There's a problem. I don't know how to get the old pump out....Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t3385698-lost_scotchgard_spray_attachment_needWe lost the scotchgard spray attachment and need a replacement for our Bissell Power steam pro.Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t3368659-bissell_pro_heat_carpet_cleanerI have a Bissell Pro Heat Carpet cleaner and the brushes will not turn. The pully is not turning the belt.Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t3174257-replace_plastic_lever_convertshow do I replace the plastic lever that converts the vacum from floor to tools?Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t2280848-carpet_cleaner_will_not_spray_maybemy carpet cleaner will not spray liquid out My Bissell Proheat has stopped spraying also. The tool will spray a little but doesn't seem to have enough pressure to really SPRAY.Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t2330366-bissell_proheat_7_will_not_spray_waterproheat 7 steam carpet cleaner will not spray water and cleanerWed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t2166554-bissell_proheat_pro_tech_7901_will_notBissell Proheat Pro-Tech Mod #7901 Will not spray any liquid to the carpet and red cross indicator is not turningWed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t2952140-bissell_proheat_only_sprays_few_secondsMy bissell proheat will only spray water from the floor or the hose for a few seconds each time I pull the trigger. I dissasembled the unit twice and checked all the lines and the heater for clogs. I even tested the motor by taking a couple hoses...Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t2945607-bissell_proheat_2x_leaves_dirty_waterit continues to leave spots even with clean waterWed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t2776217-belt_brokeBelt broke on cleaner for the pump how do iget the new belt back on ?Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t2884261-bissell_pro_heat_7901_will_spay_hose_butBissell Pro Heat 7901 will spay through hose but not the floor and red flow indicator will not spin. So we took the housing off and after unclogging a hose running to the hearter, my husband unhooked the hose that goes to the flow indicator, blew in...Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t2698163-pro_heat_carpet_cleaner_will_not_pumpPro heat carpet cleaner will not pump solution to either cleaner head...sometimes, at first, pump will work for about 1 minute or so...tried re-seating the tank, but no good...what should I check?Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t2722910-no_operating_instructions_model_7901_1I have no operating instructions for model 7901-1. There are two or three different cannisters and I don't know what goes in what or how much.Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t2864109-will_not_vacuum_up_waterwhen trying to clean my rug, the cleaner will not remove the expelled water.Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t2848235-will_clean_carpet_but_get_dirt_upit will clean the carpet but how do i get it to **** up the dirtWed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t2838493-bissell_proheat_leaving_much_waterThe bissell proheat is leaving too much water on the carpetWed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t2688968-cleaning_solutionIt really isn't a mechanical problem. I would like to know what kind of solution I need to put into my machine. I bought it used and if didn't have a manual and I can't recall what I was told to put into the machine. I hope someone can answer my...Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t2688305-brush_not_moving_in_bissell_pro_heatI have a Bissell pro-heat carpet cleaner that works well....but I just noticed the brush no longer is moving.  I checked the belt, and it is ok. It is spinning a little plastic piece that it is attached too, but the brush is still not rotating....Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t2550812-hard_floor_tool_attachmenthard floor tool attachment- how to attach????????Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t1691521-little_toothed_belt_bissell_shampooerThe little toothed belt on my bissell shampooer broke got a replacement but don't know how to put it back on Stark's where I bought the belt wouldn't help me man said he isn't a mechanic. well neither am I so could you send me a diagram I...Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t2587636-need_replace_red_clips_hold_rollingNeed to replace red clips that hold rolling brush on 7901 ProheatWed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t2488138-says_bissell_12_amps_pro_heatIt says it is a Bissell 12 Amps Pro Heat with Safeguard, and a light indicator on it. So basically it is not spraying out water. I just got it serviced today and cleaned.Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t2483665-need_user_manual_bissel_7901_1I need a user manual for the Bissel 7901-1Wed, 09 Dec 2009 06:27:48 GMThttp://www.fixya.com/support/t2343146-need_manual_bissell_pro_heat_carpetI need a manual for the bissell pro heat carpet cleaner #7091H. I used it but I can not get it to **** the dirty water out of the carpet. What am I doing wrong?Wed, 09 Dec 2009 06:27:48 GMT