FixYa.com
Technical Support, Instructions & Repair Service
Home | My Products | Sign In

Online User Manual and Guide for Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry > User Guide
Showing Page 9 out of 24 Previous     5 6 7 8 [9] 10 11 12 13     Next
Search keywords inside this manual:

Showing Page 9 out of 24 Previous     5 6 7 8 [9] 10 11 12 13     Next

Sponsored Links

FixYa does not evaluate or guarantee the accuracy of any information provided through its proposed solutions, posts, or Expert Assistance Sessions. By entering this site you declare you read and agreed to its Terms. You may NOT copy or distribute the content that appears on this site without written permission from FixYa Inc.
© 2005-2008, FixYa, Inc. or its affiliates
Remove Tank Lid by rotating handle forward to unlatch lid and lifting lid off tank. Pour out dirty water. After each use, remove and rinse the lint screen located on the tank lid. A.   Remove tank assembly from unit. B.   Remove tank lid. C.   Remove any debris caught in lint screen. D.   Reinsert lint screen on tank lid. The screen will click into place E.   Replace tank lid. F.    Reinsert tank assembly into unit. Refill with clean tap water as above, steps 5 through 9 on page 8, and refill the SmartMix bottle with BISSELL Fiber Cleansing Formula as necessary. When the cleaning job is complete, rinse out the Tank-in-Tank by rinsing clean water between the bladder and tank. Return Tank-in-Tank to the machine, following steps 6 through 9 on page 8. Refer to the Maintenance section, pg. 17 for the final cleanup. The Flow Indicator is located on the machine base. It spins when the trigger is pressed to indicate that the machine is applying cleaning solution to the floor. It will stop spinning to indicate that the SmartMix bottle or bladder needs to be refilled, or when the trigger is released. Flow Indicator does not spin when set to Tool setting. This provides above floor cleaning with the flip of a switch. Just choose the cleaning tool or protector applicator, attach to the flex hose and ProHeat is ready to clean upholstery, stairs or apply extra protection against dirt and tough stains when using the Scotchgard protector applicator.* *Set the dial to Floor Cleaning when cleaning carpets or bare floors or set it to Tools/PreTreat when using the flex hose attachments or for pre-treating floors, or when applying the Scotchgard protector applicator. *SmartTemp heats the cleaning solution for carpet and bare floor application only. It does not heat solution sprayed through the accessory tools. 9 When It’s Time to Empty Tank-in-Tank Continued 3. 4. 5. 6. 7. 8. 9. 3 5D Rotate Handle to Unlatch Tip: Thorough vacuuming before deep cleaning will prevent early clogging of lint trap. Tip: A special red float device in the tank will cause the cleaner to stop  removing solution from the carpet and the motor sound will rise in pitch to let you know the dirty water tank is full. Fill bladder only with clean hot tap water The Flow Indicator ReadyTools Dial Flow Indicator ReadyTools Dial 5C   Lint Screen Pour out dirty water 4 6 3 Latched 8