Top 20
D-Link AirPlus Xtreme G DI-624 Wireless Router (DI624RE) Questions & Answers
How do I change my MS password?
Login to the modem website and change it there, usually it's an IP address similar to 192.168.1.1., if you got a manual with the device you should check there for further instructions, if not, get it here:
Link DI 624 Manual
China dvr login password
The default login password for your router is a blank.Just type admin in username and keep the password as blank.hope it worked...
Windows 8 will not connect
windows 8 is bit tricky try deleting all existing wireless profiles and refresh the router search option now it should connect or reset the router to factory defaults and put a new wifi password or try without wifi password by removing the wifi security.
How to reset a wpn824n to factory defaults
Usually you can do it with a reset pin or a tooth picker, the small hole is located in the back of the modem, you need to put it in that hole, hold it for 10 seconds until you hear a click, and then wait until the modem reboots, then it should be reseted. For any other info check the manual from the device:
Link DI 624 Manual
Firmware upgrade
Go to the D-link website to see if an update is available. Login to your router to see your current firmware version an hardware version. If update is available, download to your computer and upload to your router.
Speed on Verizon Fios
I had this problem or similar. Verizon (in New England area) upgraded my speed to 7MPS Download and 1MBS upload. It was slower than the old speed. I called in Verizon and after a lot of back and forth - well, to be fair, they were good - it turns out that the router on their site was old. They unplugged us from it and put us on a newer faster router and Voila! Worth a shot.
How to recover my old password?
When you reset your password on facebook, they send you an email with a link to click on that will allow you to change your password. Check your email you used to sign up for facebook with.
Firmware upgrade
Not sure if there are any more firmware upgrades for this model, but you can check on the D-Link website. Connect to your router using the browser interface and see what firmware is already installed. Then under the support section on the D-Link website look for firmware updates form your model. If there is, then Download to a known location on you computer (usually comes as a ZIP file). Unzip the file and using your browser connected to the router, upload the update.
Firmware upgrade frei dawnload
Usually you can login on your browser to you router and go to the management section to check for firmware updates and select that button and it will download and install the firmware. On some models, you have to go to the D-link web site and look for firmware updates for your router. Always check what you current firmware you have installed and check the version of your router modem hardware (A, B, C etc). Then you can manually download the firmware (usually in a ZIP file), open the zip file, and then using your browser connected to the router look for Update Firmware. You will have to go to where (folder) you saved the downloaded update and select that file. It is recommended that you update using a LAN connection and not a wireless connection.
Firmware upgrade
go to the dlink website and download the firmware , the log into the router and upload the new firmware.
How to change my network security key
Connect a LAN cable from the D-Link to your laptop/computer's LAN port, open the browser on your laptop/computer and enter the D-Link's configuration URL.. http://192.168.0.1 The default login = admin The default PW = blank (just press Enter) You can now change the default admin password. You can now configure the wireless settings. (security key = WPA or WPA2 encryption) Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security
Router won't power up
Check the power adapter with a multimeter. The voltage should be the same or slightly higher that the voltage stated on the adapter's label. If there isn't any or low voltage the the adapter is faulty and needs to be replaced.
Not finding what you are looking for?