After a lengthy period of inactivity, we came to use the dehumidifier and noticed that the LED...
(More)
After a lengthy period of inactivity, we came to use the dehumidifier and noticed that the LED screen was no longer lit. As a result we cannot see the settings.
I have been emptying the tank few times a day, because I had no convenient drain in basement. Now, I...
(More)
I have been emptying the tank few times a day, because I had no convenient drain in basement. Now, I have a drain and can connect garden hose to the back of machine...but I have misplaced my remote and manual. What must I do to make it work? Thx.
Model DDR6588EE - called Danby and they will not tell me what part I need or how I can order it due...
(More)
Model DDR6588EE - called Danby and they will not tell me what part I need or how I can order it due to liability associated with electrical work needed. Authorized service people will charge at least $120 (all-in) to diagnose what sensor it is, order sensor and repair it...bottom line is that i think i need to get a new one (NOT A DANBY)... if anyone else has any ideas on a solution, please let me know...
My unit is collecting moisture VERY WELL! BUT it blows warm air only which makes it very hot in our...
(More)
My unit is collecting moisture VERY WELL! BUT it blows warm air only which makes it very hot in our apartment - anyway I can get it to stop blowing warm air from the top??
I have danby ddr499h dehumidifier and it will not run, even when set to continous. However it will...
(More)
I have danby ddr499h dehumidifier and it will not run, even when set to continous. However it will run in the fan mode, etc, but not in the dehumidifier mode. Any suggestions?
I have a same problem. I pretty sure it is related to the humidity sensor. I dropped the water...
(More)
I have a same problem. I pretty sure it is related to the humidity sensor. I dropped the water bucket by accident on the dehumidifier ans I have this problem since. If you remove the water bucket, you will find the circuit diagram of the humidifier. It is very helpful when you want to troubleshoot. To access the sensor, you have to remove the front panel : Remove the water bucket and find the two screws holding the front panel. Remove it and gently praye the front panel. Be carefull, there is two clip on the top wich are really easy to break. The sensor is screwed in the top right, under the cover. The thermistor for the room temperature is on the same board, the E2 code will be displayed if you have a problem with it. E3 code is related to the termistor located on a pipe on the right side of the dehumidifier.
Hi,
I bought a 1 year old used DDR583R that wasn't used for most of the last year. The woman...
(More)
Hi,
I bought a 1 year old used DDR583R that wasn't used for most of the last year. The woman told me that it was working well. before.
I notice that the RH sensor displayed on the LCD 2% of RH!! I'm not an engineer but I know that is impossible in Eastern Canada. So to be sure, I bought an hygrometer. I read 70% RH. The only way to make the dehumidifier working is to turn it on continuously.
Is there a way to fix the RH sensor problem?
Thank you
Nick
PS: I also noticed a weird smell kind of burning dust.
I realize this is a different model but hoped you could help. Unpacked and started up new unit...
(More)
I realize this is a different model but hoped you could help. Unpacked and started up new unit yesterday afternoon. Unit would run (very noisily) for 5 minutes or so and shut down. As we observed the unit for a while we discovered the compressor would run but the fan never did. Since this is the holiday and long weekend, maybe you are not available. But any light you can shed will be appreciated. We bought this online from Air Purifiers America after checking out reports on both the unit and the company. We really hope not to have to ship it back. Of course, can't contact anyone until Monday. Thank you so much. Gayle