http://www.fixya.com/support/p483745-bosch_36_inch_pyramid_chimney_hood_blackSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comWed, 02 Dec 2009 11:15:48 GMT80http://www.fixya.com/support/t2597494-dishwasher_wont_fillthe float is not stuck the dish washer comes on and starts to cycle but no water i can hear a pump at the bottom running but nothing happens but if i pour water in the bottom it will pump it out right away my dishwasher is a bosch built in also...Wed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t2162667-bosch_dishwasher_model_smu4052uc_14Bosch dishwasher model SMU4052UC/14, Timer clicks and moves,light comes on,but will not fill with water. No noise from pump.Took dishwasher ?out,no water where it shouldn't be. How do I test the components to figure out what part isn't working?Wed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t1510817-bosch_dishwasher_latchMy Bosch 2005 Integra dishwasher won't latch. It hits in the middle and the door teeters back and forth because it's hitting the latch. It ran the first time i turned it on with water and all no problems no leaks, could even open the door and it...Wed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t113590-bosch_dishwasher_repairOur 3 year old Bosch dishwasher has developed the following fault: At the end of the cycle, the pump will run continually, even with the door open. Tried a reset, by holding down two of the programme buttons, and this has no effect, other than...Wed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t275679-bosch_dishwasher_shu_3302there are no indicator lights on the control panel. There is power to the on/off switch.Wed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t1494919-kitchen_hood_broan_nutone_rm5200_hoodThe range hood when turned on, won't **** air and has a loud knocking noise which vibrates the cabinets around.Wed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t1581455-bulb_blown_one_lights_but_other_lightThe first time a bulb blew on the cooker hood the other light stayed permanently lit and would not switch off with the switch (the extractor fans continued to work ok with their switches.) The hood was still under warranty so the indesit engineer was...Wed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t1677435-guys_name_graziano_am_tryinghello guys my name is Graziano .I am trying to remove the front panel and circuit module from my nutone allure delux range hood.I have dissasembled the bottom cover and can reach it but there aren't any screws,how does it come appart? Thanks for your...Wed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t2342023-cillit_bang_stainrd_stainless_steelI have similiar problem. Surely manufacturer should put a warning on a package as it doesn't state that product is not suitable for stainless steel. Also using the same product on my sink did not cause any damage? Also surely it takes more that 5...Wed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t562261-water_tank_noisereqire a tube to add to water inlet pipe to eliminate water falling soundWed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t1257795-lights_but_no_power_going_motor_extraJust moved in to new house and the lights work on the hood but no power is going to the motor hence it does not work.Wed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t260853-oven_range_fan_its_own_circutI am installing a 30" island range hood fan and was wondering if I should run a single circut plug or if I can use the old plug that is on a shared circut?Wed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t823957-light_bulb_socket_replacement_really_oldHi, I'm really having a tough time searching for a replacement for the light bulb socket in my old (looks like >10 years) kitchen hood. I can't see where the model number of the hood is, so I don't know how to get the part. Is there a generic socket...Wed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t929713-fire_cut_off_wiring_hood_lightsHow is this wired thru ansual systemWed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t997011-range_hood_light_failureFan works but lights will not. switched bulbs and still lights not working. Please helpWed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t2498409-clean_hood_having_problem_removingHow do I clean the hood? Having problem removing grids.Wed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t2500881-off_fan_from_motorhow to take off fan from motorWed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t2566647-put_continuity_meter_across_livehave put my continuity meter across live and neutral but when i switch fan on it creates a shortWed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t3077415-isl93_ikss_range_hood_display_flashesThe display on my 5 year old ISL93.IKSS range hood flashes A for all fan speeds. The fan sounds like it's going faster as you increase fan speed but there is little or no suctionWed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t3141197-offset_venting_new_microwave_range_hoodJust bought a microwave/range hood and have to install it 16 inches to left of old one. (New cabinets). Is there a fix to take rectangular fix venting left 16 '' and connect to new rectangular fixed vent on microwave/range hood?Wed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t3150175-fan_blade_new_broan_range_hood_wooblingI checked if the the fan blade is rotating freely to my new purchased range hood (because of a previous bad experience with the same model). It does rotating freely but it's wobbling (the distances from the blade to the upper metallic frame is...Wed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t2437279-light_cooker_hood_doesnt_workextractor works, but no light. New bulbs fitted. No visible wires burned/damaged.Wed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t2455305-maximum_distance_between_hobwhat should be the maximum distance between hob and hood and still maintain efficiencyWed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t2389243-thermador_hood_ph48zs_stopped_workingI checked the Plugs, the fuse box, loose wires, etc. nothing obvious. Any ideas? I could use a schematic for the boxes inside.Wed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t2400861-height_britannia_omaggio_90_cooker_hoodwhat is the height of britannia omaggio 90 cooker hood?Wed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t3259645-amana_vp_610_cooker_hood_purchased_inWe have an Amana VP 610 cooker hood purchased in 2001 and need a new filter for it,are you able to supply one and also a new bulb for it?Wed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t3262179-hood_will_not_go_up_or_downHood will not go up when pressing the button to operate. Motor makes a noise but no movement.Wed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t3267267-every_time_switch_hob_goes_into_errorEvery time we switch the hob on it goes into error stats. Once this clears it works fine?Wed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t3268553-ventline_hood_in_1995_winnebagoI have a Ventline hood in my 1995 Winnebago Warrior what voltage and wattage is the bulb and where in the UK can I obtain a bulbWed, 02 Dec 2009 11:15:48 GMThttp://www.fixya.com/support/t3289645-mount_hood_veneer_wallhow to mount a hood when the screws on the back do not match the veneer studs on my wall?Wed, 02 Dec 2009 11:15:48 GMT