Top 20
KitchenAid 30 in.KECD806 Electric Cooktop Questions & Answers
I need the gasket for
Hi,
I have checked a number of sites and many of the gaskets or seals for this model are not available....
I would call a site like this one and see if they could recommend a functional replacement for you.
http://www.appliancepartspros.com/partsearch/model.aspx?model_id=238863&diagram_id=28248973#d28248973
heatman101
Dont start fire
IF YOU DONT HEAR IT CLICKS, MOST LIKELY PROBLEM IS WITH SPARK MODULE, IF YOU HEAR IT DOES CLICK, BUT GAS DOES NOT IGNITE, CHECK IF IGNITERS FOR CRACKS OF CERAMIC INSULATION, THEN ITS BAD IGNITER. IN SOME CASES IT MIGHT BE A SPARK SWITCH. JUST TAKE A LOOK AT THIS VIDEO, IT WILL GIVE YOU AN IDEA HOW THEY MADE, AND WHAT MIGHT BE WRONG. HOPE IT HELPS.
2/18/2014 12:44:37 AM •
KitchenAid...
•
267 views • 0 helpful votes
Electric shock
Get yourself a $5 electric socket tester at a place like Lowes or Home Depot and check all of your electric plugs it will tell you if all three wires in the socket are correct, wire wrong or if one is open,
2/26/2014 12:41:48 AM •
KitchenAid...
•
188 views • 0 helpful votes
Scratches because of steel wool
Is there directional grain..? I have removed small imperfection in stainless look by gengtly rubbing only in the same direction as the existing grain.. and be careful sometimes the repair is worse than the issue..
10/12/2013 5:25:19 PM •
KitchenAid...
•
256 views • 0 helpful votes
Ignitor clicking constantly
2 POSSIBLE PROBLEMS: 1ST - SPARK SWITCH ON ONE OF THE BURNERS GOT STUCK, OR 2ND - SPARK MODULE IS BAD. HERE IS THE VIDEO INSTRUCTION HOW TO DISASSEMBLE KITCHENAID COOKTOPS AND HOW TO REPLACE THOSE PARTS. HOPE IT HELPS.
9/22/2012 10:26:25 PM •
KitchenAid...
•
216 views • 0 helpful votes
Not finding what you are looking for?