20 Most Recent
Audiovox Rampage 1200 Watt Amplifier Car Audio Amplifier Questions & Answers
Can i hook this amp to my home sound system
Technically, yes, but there are some challenges. First, the input voltage to the amp is 12VDC, not 120VAC. You would need to find a power supply large enough to supply 12VDC at 30-40 amps (plus has proper currently limiting or fuses to protect against overloading). Second, most home speakers are 8 ohm impedance. While the amp can power an 8 ohm speaker, the output power is cut in half (compared to a 4 ohm speaker).
Hi i have an rampage
http://audio.manualsonline.com/manuals/mfg/audiovox/audiovox_stereo_amplifier_product_list.html
just enter in product number and info
Audiovox modulator
http://audio.manualsonline.com/manuals/mfg/audiovox/audiovox_stereo_amplifier_product_list.html
enter in product model number and info
6 disc rampage audiovox modulator
You can go to this address and obtain wiring and product info:
http://audio.manualsonline.com/manuals/mfg/audiovox/audiovox_stereo_amplifier_product_list.html
enter in product info model number etc.
Tv deck problem
it is because a tv cable is un plugged.so connect all the cables and try again.
Rampage amplifier
The amp is supposed to turn on and off with the head unit. The remote wire on the amp should be connected t othe amp control/power antenna wire of the head unit.
The pop should go away when the remote is being switched on with the head unit.
If the amp is staying on with the key removed, it will drain your battery. You need to re-wire it so you don't get stranded.
What are the input wires on a audiovox amp777
The Audiovox AMP777 is a 4-channel power amplifier, and the input wires will depend on the audio source you are using. Typically, the amplifier will have RCA input jacks for left and right channels, and you would use RCA cables to connect the audio source to the amplifier. Some amplifiers also have a high-level input option, which would allow you to connect speaker wires directly to the amplifier's input terminals. However, it's always best to consult the user manual or contact Audiovox support for specific wiring instructions for your amplifier model.
Not finding what you are looking for?