20 Most Recent Honeywell Power Humidifier: Furnace Humidifier/ Humidifier - Page 9 Questions & Answers

0answers
0answers
0answers
0answers

Nebulizer nothing

Be the first to answer 12/17/2013 3:50:13 AM • Honeywell... • Posted on Dec 17, 2013Be the first to answer
0helpful
1answer

Reset clean light

clean ligth its means still have dirt in filter or any,,,just clean and its will goes by its self,,if not try to off an on again,but still the same,,its means the sensor need to replace,call for the service technician,dont waste time and money if you dont have any idea for the repair
11/2/2013 8:53:10 PM • Honeywell... • Answered on Nov 02, 2013
0answers
0helpful
2answers

Valve makes a loud clicking noise and activates

Sounds like your humidistat is the problem. Try turning it off, if still clicking, disconnect one of the wires at the valve (if accessable). If the valve doesn't close, replace valve. Otherwise replace humidistrat.
1/17/2013 4:07:39 PM • Honeywell... • Answered on Jan 17, 2013
0helpful
1answer

Honeywell HE365A Humidifier

Here is a link to your humidifier manual http://dar.proflo.com/darmanager/Query?PRODUCT_ID=3520047&USE_TYPE=INSTALLATION
1/13/2013 10:33:30 PM • Honeywell... • Answered on Jan 13, 2013
0helpful
2answers

Need to replace the hb1 valve (mfg part mh26533)

Put the humidifier number, not the solenoid number, into Google or directly at www.appliancefactoryparts.com . They show a breakdown of the humidifier and let you order replacement parts. I've just ordered the solenoid assembly, which they say is in stock.
10/31/2012 2:30:15 AM • Honeywell... • Answered on Oct 31, 2012
0answers

MH26533

Be the first to answer 8/2/2012 4:20:32 AM • Honeywell... • Posted on Aug 02, 2012Be the first to answer
0helpful
1answer

I have a HoneywelI Enviracare Elite whole house humidifier. I have no power to the thermostat. The wire goes into the furnace and is attached to a control board. The furnace is working. Humidifer is n

Most of the humidifiers are run by 24 volts AC. disconnect the power wire to stat on circuit board and check there with meter and connect to low voltage ground for 24 volts, I'm assuming the two wires that power the humidistat are red and white.typically red is used for power. most likely you have power if the red for the stat is connected to the W on the board and the heat works, but the humidifier only works while heat is on.the next thing in line is the humidistat , it's a switch so if there is only two wires going to it take them off the stat and connect together, if furnace is on heat and running and stat wires are connected it will send power to water solenoid, if its not working yet the problem lies in the water solenoid if you have 24 volts at the two wires at solenoid.check while disconnected, do not connect those two wires together or a 3 amp fuse will blow on the furnace board. if you have 24 volts there then the valve may be bad or the valve may be stuck or clogged, loosen water supply line to make sure water is getting to valve. I spent many years working in the HVAC industry.
12/31/2011 11:25:56 PM • Honeywell... • Answered on Dec 31, 2011
Not finding what you are looking for?
Humidifiers Logo

142 questions posted

Ask a Question

Usually answered in minutes!

Top Honeywell Humidifiers Experts

Paul Carew

Level 3 Expert

3808 Answers

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you a Honeywell Humidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Honeywell Humidifiers

  • Honeywell Humidifiers

Most Popular Question

honeywell true steam heats but

  • Humidifiers
Loading...