20 Most Recent GE 25951EE2 Phone Questions & Answers


Recording the Outgoing Announcement

For best results when recording, you should be about nine inches from the microphone, and eliminate as much background noise as possible.

1. Make sure the answering system is ON.

2. Press and hold the announce button on the base.

3. Begin speaking after you hear the beep.

4. Release the button when you finish your announcement.

5. Press and release the announce button to review your outgoing announcement.

GE 25951EE2... | Answered on Mar 29, 2011


I had the same issue - DSL company told me to remove the filters. It worked.

GE 25951EE2... | Answered on Aug 19, 2009


I can't read my caller Id Screen numbers are disappering

GE 25951EE2... | Answered on Jun 18, 2009


I just got off the phone with a GE rep, they said to unplug all phones from the wall for 15 minutes, then remove the batteries and put them back in the opposite way they came out. That will reset the system and fix the problem.

If it does not fix it, you'd need to purchase new phones.

GE 25951EE2... | Answered on May 29, 2009


you should be able to find the battery at radio shack

GE 25951EE2... | Answered on Apr 24, 2009


There is no way to have 2 phones in use at the same time- unlike different models of phones you may have had-like a ge in the kitchen and rca in family room-they do not conflict the signal-these are all on the same channel and will not share the connection from the base.

GE 25951EE2... | Answered on Jul 29, 2008


here's what my instructions say about turning off the ringer:

Ringer high/low/off Shortcut

Apart from the setting in the main menu, there is a shortcut to set the ringer. Make sure the phone is OFF (not in talk mode).

1. Press the #RINGER/PAUSE button to go to the RINGER VOLUME menu. RINGER 1HIGH shows in the display. 1HIGH is the default.

2. Use the cid/vol (- or +) button or the touch-tone pad on the handset to scroll to 1HIGH, 2LOW, or 3OFF.

3. Press the #RINGER/PAUSE button to save your selection. You will hear a confirmation tone.

GE 25951EE2... | Answered on Jul 17, 2008


here's what my instruction booklet says:

Changing the Security Code

The default security code for accessing the answering system from another location is 1 2 3. You must use the handset to change the security code. With the phone OFF (not in TALK mode), follow these steps:

1. Press the FLASH/answerer/Call wait button to display ANSWERER REMOTE.
2. Press the *EXIT/TONE button.
3. Enter the new 3-digit security code.
4. Press the *EXIT/TONE button again. The unit announces the new code, pauses, beeps, and then announces the menu options again.

hope that helps

GE 25951EE2... | Answered on Jul 17, 2008


Press and hold the skip key on the answerig machine for two seconds. You will then hear english selected. It took me 30 mintes, but I finally found my instructions manual in english! lol

GE 25951EE2... | Answered on May 25, 2008


I have changed my phones in the bases and it fixed this problem, you also need to make sure it is charged up well. I have problems with the volume even on # 4. Don't you?

GE 25951EE2... | Answered on Feb 22, 2008


The solution for the base (not the handset) is to press and hold for 2 seconds the "Skip" button (it's marked with ">>").

GE 25951EE2... | Answered on Jan 17, 2008


The additional handset and the base need to "pair" first. Put the handset in the base cradle till you see the red light blinking. That's when they are paired.

GE 25951EE2... | Answered on Dec 08, 2007

Not finding what you are looking for?
GE 25951EE2 Phone Logo

33 questions posted

Ask a Question

Usually answered in minutes!

Top GE Lands Phones Experts

Cindy Wells

Level 3 Expert

5866 Answers

Dudeman321

Level 2 Expert

233 Answers

Marvin
Marvin

Level 3 Expert

84625 Answers

Are you a GE Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GE Lands Phones

  • GE Lands Phones

Most Popular Question

caller id

  • Lands Phones
Loading...