20 Most Recent Dual OfficeMax - Radio Control Alarm Clock. Questions & Answers

Have you tried booting in safe mode with dos prompt ? Press F8 continously as soon as you switch on the machine , you will get a menu , select safe mode. Oncce in you can navigate using DOS commands. Just type HELP and press enter.

Just broke it

If it's belt driven, maybe it snapped. It's just rubber.

I can provide you with the steps to connect a dual wireless UHF microphone system to a Yamaha RX-V683 AV receiver:

1. First, make sure that the microphone transmitters and the receiver are turned off and unplugged from any power source.
2. Connect the receiver to the AV receiver using audio cables, such as RCA or XLR cables. The output jacks on the receiver should match the input jacks on the AV receiver.
3. Turn on the AV receiver and set it to the input that the wireless microphone system is connected to.
4. Turn on the wireless microphone system and set it to the same frequency as the receiver.
5. Adjust the volume levels on the AV receiver and the wireless microphone system as needed.
6. Test the microphones to ensure that they are working properly and that there is no feedback or other audio issues.

It's important to note that the steps above may vary depending on the specific wireless microphone system and AV receiver model

Your message is to 'Alan'. We are Fixya dot com. Perhaps sending via email would be better. The wires from the amp go to the input of both volume controls. The output goes to the speakers Or forget about stereo and left and right. Have the left channel go to the jukebox and the right channel go to the extension speakers

No instructions are available online. You may as well buy a new pair for $24 and get the manual with them https://www.google.com/search?q=concepts+ccdcir10++manual ..

FISHER MC-630 AUDIO COMPONENT system Turntable ...

https://lptunes.com > products > fisher-mc-630-turntabl...

Buy a FISHER MC-630 AUDIO COMPONENT system Turntable Replacement Belts for your record player. Fix your broken FISHER MC-630 AUDIO ... US$16.99 · ‎In stock Videos https://www.google.com/search?q=Fisher+mc-630+belt+replacement ..

Hello David, I am sending you a link on a model of Telefunken radio recorder, to see if it is the same as yours Hope so Greetings Franco Dosil Hola David, le estoy enviando un link sobre un modelo de radio grabador de Telefunken, para ver si es el mismo que el suyo Espero que si Saludos Franco Dosil https://www.radiomuseum.org/r/telefunken_bajazzo_stereo_cr8000_cr.html

Record players have a phono output that is much lower level than other audio equipment. If your receiver has a phono input that will have a preamp to adjust the level. Or your turntable may have a switch between phone o or line level and that would increase the volume as well. Most audio signals are line level but phonos are a magnetic signal that is much weaker and needs to be Amplified by a preamp in your receiver or in the unit itself.

https://www.teac-audio.eu/en/products/w-1200-152362.html https://www.teac-audio.eu/en/products/w-1200-152362.html

Marantz Service Manual Model SD160 stereo Cassette tape deck player... For sale for $13.99 on Ebay.

Hello, Edward - I have only been able to find Service Manuals for the Marantz SD-160 dual deck cassette player for sale. I was unable to find the operating manual for the vintage cassette player / recorder on the Marantz website. However, if you have not yet already done so, I suggest you contact Marantz Support, either via phone or email, and ask if there is a copy of the operating manual for the SD-160 in the company archives and if they could provide you (sell you) a photocopy or scanned PDF version of the manual. This is the link to the Marantz Support page: https://marantz.custhelp.com/app/answers/detail/a_id/104/kw/manual/related/1 If that option doesn't work out, Option 2 is to find one or more online sellers (eBay, Craigslist, Amazon, etc.) of the model of cassette player / recorder and see if they mention the operating / owner's manual in the product sales information. If they don't mention a manual, I suggest contacting the seller/s and asking if they have the manual. If you find an online seller with the manual, ask if he / she would either photocopy the manual for scan it as a PDF document and sell it to you. Best wishes.

All you should need to do is tune the clippers with the large tuning screw on the side of the case until the loud noise stops and they just hum as they should. They might need some other adjustments to blade alignment after this. A barber should help you with this if your not sure. I pays to have blades correctly aligned for clippers to function correctly and safely so they dont pull hair or cut your skin. Oil blades every time you use clipper and they will last a lifetime.

Just google it.

Look on the data plate to see if there is a voltage and current draw value on it. The switch should be rated at 120 Vac @ 10 A.

It sounds as if the UP VOLUME button/switch is broken and ON all the time. See if it is stuck down ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Use the pre in out connections or any in/out connectors that you have. Can you send a picture? ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

It seems that the special grease is old. There is a wheel moving the toneam. Remove any old grease from it and try again. If you need further instructions or a way to get new grease please refer to www. dual-board.de This is the worlds largest knowledge base for vintage Dual turntables. It is in german, but feel free to post in english, most people here in germany speak english, too.

1. so who knows what kinda malware this site is spewing.
2. But if ya still looking for a xdm6820 faceplate I recently aquired one in auction
3. You still got the deck?
4. july 06 2014 today is 3 18 2015
5. Dallas Tx area

on what