Top 20 Acer AL1916W 19" LCD Monitor Questions & Answers

Antitheft will not or should not conflict with your applications, why would you want to remove it? I would advise you to speak with the provider or manufacturer.

Acer AL1916W 19"... | 183 views | 0 helpful votes

It is Windows 10.
I have reverted my machine back to Windows 8.1 and its working perfectly.
As long as you haven't had Windows 10 on your machine for 30 days you can revert back to Windows 8.1.
First of all open Settings and click Update and Recovery

Now in Update and Recovery window click on Recovery option. This will open a list of 3 options on the right hand side. You need to look for "Go back to a previous version of Windows" option. To start the process, click Get Started button under this option. It will ask you to plug in your charger before allowing you to continue.
Make sure your battery is fully charged, because before you press the get started button you need to place the cursor over the button and plug in the charger.
Once the screen goes black press the keypad which should then click the button.
Wait a few seconds and then unplug the charger.
All being well the process will now continue without the charger plugged in.
Once you get to the restart screen it should be safe to plug in the charger and you should then still have a screen you can see.
Hope this helps.

Acer AL1916W 19"... | 116 views | 0 helpful votes

Hello Rowjck, I'm going to share few steps, just follow them. It help you to fix it.

Right click on the desktop -->> Clicks on Properties -->> "Settings" tab -->> "Advanced" button -->> "ATI Displays" tab Then press M or click on the word monitor (in bold above the image) At the bottom of the "Monitor Properties" window that just popped up, select 1366 x 768 in the maximum resolution drop down list. Now return to the Display Properties > Settings tab and select it there.

I hope these steps will help you, if you still face same issue, hit me on +1 (844) 355-5111 (toll-free).


Acer AL1916W 19"... | 255 views | 0 helpful votes

Yes. Plug the VGA cable in and connect to a laptop or suitable signal source then try again. It will power up OK if there is a signal from your description.

Acer AL1916W 19"... | 191 views | 0 helpful votes

Failing power supply

Acer AL1916W 19"... | 917 views | 0 helpful votes

When you start the computer, you can press a key to enter the BIOS, if you do that look at the date and time to see if they are correct, if they are not then the battery is bad. If they are ok then look at the information that shows the hard drive, if the hard drive is not listed, then it has failed. (unless the BIOS does not show that) At any rate, this issue is a hard drive issue and it is either failing or has lost its boot sector information. You can correct a boot sector issue with a windows disk if you have it, but since you did not list the operating system info, that is all I can offer.

Acer AL1916W 19"... | 208 views | 0 helpful votes

I think that would be the other way around. You need to replace it with a card that supports LCD monitor.

Acer AL1916W 19"... | 56 views | 0 helpful votes

How did the auto configuration came about? Try pressing the buttons before powering up. Maybe some of it are stuck.

Acer AL1916W 19"... | 321 views | 1 helpful votes

You may have a bad capacitor which involves on board soldering and a cap test unit. You can sometimes see a bad cap (capacitor) due to the top bulging and not flat.

Most LCD screen issues like this are going to be about a bad cap. There is a web site that may help;

Acer AL1916W 19"... | 71 views | 0 helpful votes

Pozdrav, ako vam se uopste ne pali monitor problem je u napajanju i to kod tog modela je cesta pojava.Najverovatnije je potrebno zameniti elektrolitske kondenzatore. Kompletno uputstvo imate na
PAZNJA:Ako niste posebno upoznati sa elektronikom vodite racuna jer moze doci do strujnog udara iako je uredjaj iskljucen.Nadam se da sam vam bar malo pomogao.
Acer AL1716 AL1916W AL2017 AL2416W LCD Computer Video Monitor Repair...

Acer AL1916W 19"... | 98 views | 1 helpful votes

Yep, that should do very well. The voltage (19V) is critical - that should match exactly. The current (3.16A, 2.6A) isn't so critical, but the power supply MUST supply AT LEAST as much current as the monitor requires. The extra current capacity won't hurt anything at all, it just won't get used for anything.

Acer AL1916W 19"... | 80 views | 0 helpful votes

not necessarily, its just not receiving signal from the computer check your video card that might be the culprit

Acer AL1916W 19"... | 180 views | 0 helpful votes

Can you please tell me more details as to what you want to do :)

Acer AL1916W 19"... | 93 views | 0 helpful votes

usually when you turn a monitor on it will display the company name of that monitor. Then after that it waits for the signal from the computer if there is no signal coming from the computer it usually has to do with the video card

Acer AL1916W 19"... | 176 views | 0 helpful votes

Hi Ali,
Sounds like the familiar leaking capacitor syndrome.
You will need to remove the back from your monitor which can be a challenge in itself.
Have a look at the power supply board which is the board that the mains cable plugs into.
You should find that some of the capacitors have a bulged appearance on the top or a gooey substance has leaked out onto the board.
Capacitors are the small metal cans on the circuit board.
These need to be replaced and if you are reasonably proficient with a soldering iron this should not prove too difficult.
Try eBay or somewhere similar to locate replacements which are not expensive. Make sure you buy capacitors which are described as low esr. If there are more capacitors of the same value on the board then it would be wise to replace them all.
You should be rewarded with a fully working monitor once again.
I have repaired many monitors with this problem and this has always been due to these leaking capacitors.
Wishing you every success Ali.

Acer AL1916W 19"... | 44 views | 0 helpful votes

If you have tried connecting and using the monitor on another PC and it works .... then it may be the connection (of the monitor to your PC), or the PC port that is not working.

If you don't have another PC to test the monitor, disconnect the monitor, shut down your PC, connect the monitor, restart your PC ... and hope for the best.

Acer AL1916W 19"... | 212 views | 2 helpful votes

try separating the wiring. Wires that touch create cross-talk of signals.

Acer AL1916W 19"... | 31 views | 1 helpful votes

Connect the speakers to the audio port provided on the computer.

Acer AL1916W 19"... | 57 views | 0 helpful votes

You mean thunder bird Mozillfirefox is a search Directory like Internet Explorer,just double click on attachment or looks like paper clip it opens your attachment.

Acer AL1916W 19"... | 20 views | 0 helpful votes

Not finding what you are looking for?
Acer AL1916W 19" LCD Monitor Logo

728 questions posted

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Alun Cox

Level 3 Expert

2679 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

AL Acer

  • AL Acer

Most Popular Question

acer lcd monitor shows auto

  • Computers & Internet