20 Most Recent
Maytag Performa PAV2200 - Page 3 Questions & Answers
My maytag commercial 2000 series
Verify if the shipping bolts were removed. The machine will be shaking and moving if they weren't. In the back of the machine there should 4 big bolts attached with nuts.
Black residue inside gas dryer
r u on lp gas or nat gas if u r lp gas u need to convert the burner from nat gas to lp gas u need to call your gas co. to do the convertion
Maytag Performa leaks
Remove the 2 screws on the front panel and remove the panel. Run a cycle and look for the leak. Post back your findings.
Loud and noisy when the wash cycle starts.
Slide the unit out from the wall and open the small access panel on the back, bottom left side. 98% of the noise problems from this model is do to the bad design on the drain pump which has since been redesigned and will need to be replaced.
Here is the new pump.This washer pump has been redesigned by the manufacture. The mounting plate is no longer required. It now mounts directly to the base of the washer.
Dryer drum does not rotate
can you hear the motor at all? probably broke the belt. Not to difficult to replace belt. Posibility drum is off center.
Not finding what you are looking for?