I have a Maytag PAV2300aww and it the spin cycle is not working. The belt on the bottom is working...
(More)
I have a Maytag PAV2300aww and it the spin cycle is not working. The belt on the bottom is working fine. Can I get a manual somewhere? My manuel was destroyed in a basement flood. Thanks
same as above,won't spin in 2 cycles except for the pre-soak cycle. The machine can spin, but not in...
(More)
same as above,won't spin in 2 cycles except for the pre-soak cycle. The machine can spin, but not in certain cycles.
My washing machine timer seems to be working fine and moves through the cycles, it will fill up and...
(More)
My washing machine timer seems to be working fine and moves through the cycles, it will fill up and spin the water out but does not agitate. It makes a weird grinding noise like it's trying to do something but nothing happens.
During water in machine timer was undertaken why water at once wentout to draines.so when the...
(More)
During water in machine timer was undertaken why water at once wentout to draines.so when the waterway motor at once went out to draines and the empty basin
Occasionally the spin cycle stops, and when i use my hand to help the agitator it starts again, then...
(More)
Occasionally the spin cycle stops, and when i use my hand to help the agitator it starts again, then it spins super fast like its going to take off? its a maytag pavt234aww performa bought back in 2003, I have replaced the belt and the snubber, as an attempt to control its rocking and rolling...
Washer fills correctly and agitates very well. When the timer reaches the spin cycle it starts very...
(More)
Washer fills correctly and agitates very well. When the timer reaches the spin cycle it starts very slow and if left operating the tub remains almost full. I chacked the pump and it is operating. I removed the lid safety switch and connected the wires together and the operation remeined the same. After trying everything else I turned the waher off, moved the dial a little and turned it on again the spin cycle worked well and the tub drained completely. This has to be done for both spin cycles and requires standing in front of the washer all the time. Cuould this be a faulty timer or a faulty timer switch? Can the timer switches be replaced?