http://www.fixya.com/support/p46972-maytag_neptune_front_loading_washer_wSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comSat, 05 Dec 2009 14:15:20 GMT80http://www.fixya.com/support/t789509-washer_not_spinning_or_drainingI have a Maytag front loading washing machine (model number MAH2400AWW) Our washing machine has stopped spinning and draining. It happened in the middle of a wash, the error code was nd. All we get now is a loud hum but nothing else works. I...Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t3532080-order_replace_rubber_boot_maytag_washerWill I, a regular consumer, be able to order and replace that rubber boot inside the front door of my Maytag Neptune front load washer?Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t3394690-unit_keeps_filling_until_water_leaksThe unit keeps filling until water leaks from the door. Unless we hit the stop button the machine seems to be willing to keep filling, even while it is in 'drain' mode. I removed a quarter from the drain pump and once I put it back together and we...Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t3256300-indesit_washing_machine_wm12xIndesit Washing Machine WM12X... Were Should The Water Level Come 2 On A Wash Cycle..Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t3147739-maytage_mah6500aww_overloaded_washer_nowI put in a comforter which was too large, but I have washed sleeping bags and other large articles before with no problem, so I closed the door until the door locked. That load finished without further incident. The following small load had no...Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t974324-maytag_epic_z_f_28_error_codeI have a Maytag Epic-Z washer. On the last few minutes of the cycle the washer stops and gives and F-28 error code. The manual states that F-19 thru F-31 are electrical errors. Is there something I can check before waiting 2 weeks for Maytag to send...Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t3088959-washer_spin_could_wrongMY WASHER WON'T SPIN, WHAT COULD BE WRONGSat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t3079188-candy_go1682_makes_very_loud_bangingmy candy go1682 makes a very loud banging noise on spin,it almost sounds like a plane taking off. julieSat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t2953749-maytag_neptune_front_load_washer_doorMy Maytag Neptune front load washer door won't lock and won't spinSat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t3005645-washer_door_locked_getMy washer door is locked and how do i get it unlocked. the light is on and will not go off even after i ran thru a cycle.Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t2289107-maytage_neptune_e3_code_model_mah8700awwMaytage Neptune - MAH8700AWW same problem as PMLAPL - Code E3 and machine won't finish cycle.Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t2984694-deciding_washer_buy_need_dependabilitymoney is no object and is one made that has a pre rinse before washing?Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t2972015-touchscreen_lights_up_but_obeyI live in Canberra, the Federal Capital of Australia. I bought a   Maytag Neptune in 2005, 21st of November from a very reputable Department Store, David Jones, in Canberra. I have lived in America over the years on and off and have all ways...Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t2954543-maytag_neptune_clothes_washerHi, I have a Maytag Neptune (clothes) Washer. The tub didn't drain. Ran it twice. The second time with no soap. The drain pipe is not blocked. The hose is not kinked. I just leveled it because it was rocking around. Any ideas as to why it won't...Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t2883147-maytag_neptune_washer_hot_water_fillmaytag neptune washer hot water continues to fill even during spin/drain cycle, results in extra water in unit/spillage b/c water can never drain all the way cold water ok, ie if i turn off hot water valve at wall, then no problem how do i check the...Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t2861032-error_code_3e_maytag_washerAfter burning smell was dectected, strange error beep sounded and dryer stopped, displaying error code 3E. What's up? This is not described in the manual. Clothes are wet....help!Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t530109-very_noisy_neptune_6500_in_spinwasher has become very noisy in spin what is it and what can be done.Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t2654480-machine_washes_but_drainthe #22 is on the control panelSat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t2485521-maytag_neptune_frontHave a Maytag Neptune front loader washer and the door won't unlock. Have tried unplugging and replugging. Paused and let wait etc. Have load of wet clothes inside because when we started the washer the "do" signal came up and wouldn't let us open...Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t2371613-maytag_top_load_mtw6600tqo_fills_bitmaytag top load mtw6600tqo fills for a bit then flashes F 50.Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t2344503-neptune_mah6500aww_spinit fills, agitates and pumps water out just fine. Originally told by appliance tech to replace the pump. Bought new pump ran load and again when it came time to spin. It thought about it but did not spin. Just kicked itself off after trying to spin....Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t2341773-maytag_mah4000aww_wont_stop_runningI've done an exhaustive search of your data base and haven't found this problem with this model. At the end of the cycle the washer gets stuck in the slow tumble phase. The door stays locked and I have to manualy stop the Washer then wait for the...Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t1671429-mah4000aww_clothes_still_wetWe bought this machine new in 2000. Had the control board replaced at least once and it has been working fine since. The last few days the clothes have been dripping wet when I go to take them out. We cleaned out the drain hose and pump, ran bleach...Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t721176-maytag_fabri_matic_front_loader_waterI was doing my laundry and when I finished one load and started another, the water would not enter the machine. Only the spin cycle all works; however, there is not water and the machine will not operate without the water. Any ideas why this is? ...Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t1719011-maytag_neptune_fnt_loader_modelIs leaking an excessive amount of water at the bottom of the washer after the completion of the cycle. Please give me some advise to correct this problem.Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t137422-maytag_washerhi i have a neptune front load washer(mah4000aww). It's just started not working. It will come on briefly when I push the start button, then make a beep , beep , beep noise, then turn off.? Can you help me figure out whats wrong? Thanks for reading...Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t573620-maytag_may8700aww_washer_e3maytag may8700aww washer with e3 codeSat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t1889845-something_caught_between_drumsAn underwire slipped out of my wife's bra and somehow made it through the water drain holes in the primary tub. Now when the washer spins it makes a screeching noise (from the wire scrapping between the tubs I presume). I think I could retrieve it,...Sat, 05 Dec 2009 14:15:21 GMThttp://www.fixya.com/support/t148397-maytag_front_loading_washing_machineI have a Maytag front loading washing machine (model number MAH2400AWW). When the unit is started it will run normally for part of the cycle, then stop and show an error code of 3E. I called Maytag Customer Support, and they could not give me the...Sat, 05 Dec 2009 14:15:21 GMT