20 Most Recent Jabra BT350 Bluetooth Headset Headset - Page 5 Questions & Answers

depends on what type of phone is used but procedure is somewhat same on most models. first, turn on headset, next go to bluetooth settings for your phone and turn on. now do a search devices on the phone and it should find the headset. thats pretty much it.

Its either "0000" or "1234"

I have the same problem with my Jabra pendant. However even though the red light goes out, it still seems to be charging. Leave it connected for about 3-4 hrs and see if the battery is full.

If you mean pairing, then hold the button down until both red & blue lights flash. If your bluetooth transmitter is in paring mode too, it will connect up. Note that the headset must be off before you begin.

you need to get an anntenna for it your pc won't have blootooth built in

Google the manual and search it!

This happened to me too... Did you figure out how to fix it?

Could be feed back loop, try trying a loose knot in the wire.... Might be a battery problem.... also try to seek the unit again.....

is headset charged and turned on?

just enter 0000

Do you have a instruction book? If so, the parts should be listed in there. If not, please contact your retailer.

-K.R.

"I know what I know because I know what to do!"

change the battery

BT350 Manual in PDF (need Adobe reader to view)

Before you use your Jabra BT350, you need to pair it with your mobile
phone.
1. Put the headset in pairing mode
• Make sure the headset is off.
• Press and hold the answer/end button until a solid blue light comes on.
2. Set your Bluetooth phone to ‘discover’ the Jabra BT350
Follow your phone’s instruction guide. This usually involves going to a
‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone and selecting the
option to ‘discover’ or ‘add’ a Bluetooth device.* (See example from a
typical mobile phone in fig. 5)
3. Your phone will find the Jabra BT350
Your phone then asks if you want to pair with it. Accept by pressing ‘Yes’
or ‘OK’ on the phone and confirm with the passkey or PIN = 0000 (4
zeros).

or go here http://www.jabra.com/sites/Jabra/GNimages/Products/WirelessHeadset/BT350/Documents/BT350_UM_NA_EN_491.pdf

hope this helps

TRY 0000 (4 ZERO)

TRY 0000 (4 ZERO)

try using a large elastic band to "pin" the headset to your ear

Go to this site, and it will walk you through each step to connect your particular Jabra headset with your cellphone. Choose the headset, and then at the next page, choose your phone. Moving your mouse over each step will change the picture to what you should be seeing on your phone at each step.
http://jabra.pairx.co.uk/ Pls come back and let us know if this solved your problem.

password is 0000

Go to this site, and it will walk you through each step to connect your particular Jabra headset with your cellphone. Choose the headset, and then at the next page, choose your phone. Moving your mouse over each step will change the picture to what you should be seeing on your phone at each step.
http://jabra.pairx.co.uk/ Pls come back and let us know if this solved your problem.

I called Jabra Support and they are sending out another unit. The technician indicated that the battery is likely defective and is not field replaceable.

Thank you,