20 Most Recent Linksys Wireless-G WRP200 Router Questions & Answers

The router has a firmware installed in it. To access it, type 192.168.1.1 to enter the router's settings utility. The default userid and password is "admin"

Hi if you have Atheros Adpater in win 7 it wouldn't work with wpa security change security to 64 bitt wep

Good one to have

Please go to this link

http://ui.linksys.com/files/WRP400/1.00.06/

Go to wireless----> wireless security ---> enable the security.

You can find the simulators for every linksys router.

Thanks
Priyanshu Shekhar
[email protected]

u will get the drivers here http://www.linksys.com/download/

This could be due to the fact the when using multiple routers you need to let the main router know the routes into the second router.

I do have a question as to why you would use the second router and not the dlink?

I would suggest dropping the dlink router/modem and get your ISP to send you just a modem and then use the linksys. Or of course don't use the linksys and just use the dlink.

Yes, there are 2 phone ports available which make it a VoIP router. Cheers

You can't record to a network switch?? Are you thinking it is a PVR? https://www.google.com/search?q=Linksys+sr224

16-Port and 24-Port 10/100 Switches

Linksys https://downloads.linksys.com > userguide > sr2... PDF Use this guide to install the following products: SR216. 16-Port 10/100 Switch. SR224. 24-Port 10/100 Switch. 16-Port and 24-Port. 10/100 Switches. ....

https://www.linksys.com/no/support-product?pid=01t34000003qRpaAAE

Unplug the power cables of the router and the range extender for 30 seconds. Plug in the router first. Wait for all the lights to be stable then plug in the range extender. Your range extender should now be in synchronized with your router.

Manually configuring a Linksys Wireless-N Range Extender

https://www.google.com/search?q=setup+Linksys+Extender ..

Frontier Router Login at the bottom of the Network Connections window, just below the address bar. Select Wireless Properties from the menu. Locate the Network security key field on the Security tab. You'll see your Wi-Fi network password if you click the box for Show characters.

You can use rj45 cable to it .

This seems to be a symptom of a configuration error, which can be fixed by resetting the router to factory default. Do this by finding the (often partially hidden) reset button on the device, and pressing and holding down the button, with the power on, till lights start flashing on the router. Let go of the button and allow the router to reset (can take a minute or two). You will now have reset the router to factory default. To connect to your ISP, you'll need to enter your account details (and any other specific information) provided to you by your ISP. You will also have to set a name and password for the wifi section of your router (if it has wifi) if you don't want it to be freely accessible by everyone within wifi range.