20 Most Recent
Linksys Wireless-G WVC54GC Network Camera Questions & Answers
I connect the camera on my rooter and run the cd
1st You download Webcam Driver.
I connect the camera on my rooter and run the cdAfter this install the Webcam driver in the system.Installation of Webcam DriverGo to the control panelClick on the System IconClick on the Hardware TabClick on the Device Manager sSelect the Unknown Device or printer device where yellow Question Marks sign on it.Right click on it and uninstall it.After this go to the top of the device manager and click on scan for hardware changes.Driver installation Wizard start.Brows Your Driver from the Hard Disk and click on next.Driver will be install.
12/14/2012 5:42:42 PM •
Linksys...
•
Answered
on Dec 14, 2012
Hi
I have a Linksys Camera
Once you have properly install the software drivers for
camera, DO NOT UNPLUG it from the USB port unless
you have powered down your laptop computer or
Desktop Computer as it will cause the Camera drivers
to become corrupt.
Like wise plug the camera into the
USB port before powering up your laptop or the
desktop computer so it will recognize the camera and
drivers that are installed.
Do this to get the camera working again.
Follow the instructions below and it will work.
Disconnect the Camera from the USB port and reinstall the CD or
Downloaded software program.
When the program asks you to connect the camera to the USB port,
do so and it should work.
Then to use it on the Web, do this.
Web Camera's have to be setup on the program they are to be used
with. Just installing the camera on your computer does not set it up
to broadcast on
messengers or Skype.
Each program has Options that have to be setup in order for the Audio
and Video to function properly.
A. Skype Setup:
After downloading and installing Skype
http://www.skype.com/intl/en-gb/download/skype/windows/beta/
downloading/
set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the
Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video
picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and
Family will now be able to see and hear you.
B. Yahoo Setup:
After downloading and installing Yahoo Messenger
http://www.soft32.com/download_30.HTML
set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and
Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open
the call setup assistant" and follow the instructions on the left window.
C. Windows Live Messenger:
http://download.live.com/Messenger
After you start Windows Live Messenger, expand the view by clicking
on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click
on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the
instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can
chat and see family or friends you are connected to.
D. AIM (AOL) Messenger:
http://dashboard.aim.com/aim
On the VIM sign-in window click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the
proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps
given below:
1. Click the Audio and Video Settings button directly below the My
Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display:
You must disconnect the current AOL Live Video IM Conversation
before running setup. Would you like to disconnect now? Click the
Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify
that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display:
Would you like to first check your audio and video settings? Click the
Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that
your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror
image (text may appear backwards) when you look at your own
camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with
your Family and Friends.
Hope this helps. Bud
5/17/2011 3:04:35 PM •
Linksys...
•
Answered
on May 17, 2011
Why the setup wizard can't locate my camera
Follow the instructions below and it will work.
Disconnect the Camera from the USB port and reinstall the CD or Downloaded software program.
When the program asks you to connect the camera to the USB port, do so and it should work.
Then to use it on the Web, do this.
Web Camera’s have to be setup on the program they are to be used with. Just installing the
camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing Skype
http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/
set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.
B. Yahoo Setup:
After downloading and installing Yahoo Messenger
http://www.soft32.com/download_30.HTML
set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.
C. Windows Live Messenger:
http://download.live.com/Messenger
After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
D. AIM (AOL) Messenger:
http://dashboard.aim.com/aim
On the VIM sign-in window click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
Conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends.
Hope this helps. Bud
5/27/2010 10:17:56 PM •
Linksys...
•
Answered
on May 27, 2010
We all have this problem with this camera
do a site survey for your setup to see which channel is best for your location. Keeping in mind that wireless networks become more popular, the channel that was best then may not be best now. so you may want to do site survey and channel selection when you have problem communicating between devices.
alway upgrade your cordless phone to dec 6.0 type.
3/11/2010 3:03:56 PM •
Linksys...
•
Answered
on Mar 11, 2010
When i lock in the http/:192.168.1.100 aroung my
it might b due to less wifi signal..
use aluminium foil ..
make a cardboard type structure of aluminium foil.
and keep in the router,
it will increase ur wifi signal..
also try easywifi software
it automatically detects the wifi near u and incerase the wifi strength of u pc
3/10/2010 11:59:47 AM •
Linksys...
•
Answered
on Mar 10, 2010
Actiontec router
Move the second camera to just a few feet of the AP. After setup you can move it back out.
8/29/2009 2:42:24 PM •
Linksys...
•
Answered
on Aug 29, 2009
Doesnt work wirelessly...
see my other posts on this.
1) remove security such as WEP/WPA and see if that fixs it.
2) ping the device to verify you are talking to it wirelessly. Linksys setup software has major bugs
3) move camera super close to wireless AP as setup software uses different wireless protocol than video record software does. After it is setup you can move camera further away.
However, it won't keep connection for more than 24 hours.
8/29/2009 2:38:09 PM •
Linksys...
•
Answered
on Aug 29, 2009
Lost connection
There is no solution to this. It is a problem inside Linksys wireless cameras. The video transfer is one program and the I am alive and configuration part is another program. Both using two different wireless protocols.
So the SETUP function requires it be very close...under a few feet away from wireless access point to get it connected. Once connected you can move the camera to other locations.
However, this will only last for about 12 hours, 26 is the most I ever got.
And then you are done.
It is so brittle that after days of playing with it, I set it up and had it working at 11:00pm ,and go to bed at 11:15. At 11:22 it breaks.
Essentially too brittle of software to make it work in professional setting and requires lots of maintenance.
Cameras work pretty well when software keeps them connected.
Setup software is very amateurish and bugs galore! Take a quick 5 minute look and you will see what I mean
8/29/2009 2:34:28 PM •
Linksys...
•
Answered
on Aug 29, 2009
Wireless not working
remove wireless security as Linksys won't accept certain WEP keys
ping the device to determine that it is there. This often works and shows it is a Linksys setup problem. If can't even ping the device then you have another bigger problem.
Finally, move the camera to under 5 feet of the wireless access point and then Setup will work. After setup then you can move camera out further.
8/29/2009 2:29:49 PM •
Linksys...
•
Answered
on Aug 29, 2009
Losing wireless Connection
No solution known to fix this. Internal the software tries to refind itself.
In Linksys software there are two separate programs running. The video is sent to the wireless router and recorded on your computer. Whether it is alive or not and can be configured is a different program. That program requires the wireless camera be literally just a few feet from the wireless router. Say 5 feet or less. One configured you can move the camera to well over 100 feet from router fine.
But eventually it will lose connection and you have physically move camera back.
This is a major flaw of this system and why it won't work for a real application
8/29/2009 2:27:15 PM •
Linksys...
•
Answered
on Aug 29, 2009
Unable to start LINKSYS WVC54GC
If the power light is not on, it could only mean 3 things, power adapter, power outlet and the camera itself. First, try to connect it to a different power outlet, see if power light will come on, if not use a different power adapter with the same power specs, if still power light is not on, then it has camera could be bad. Call linksys support line and have it replace
8/29/2009 2:23:20 PM •
Linksys...
•
Answered
on Aug 29, 2009
I have windows vista and the software will not
which software is not working please explain the question briefly
for better software working result please check your os bit version 32 or 64 bit os then compatible software 32 or 64 bit softwares
8/8/2009 4:10:27 PM •
Linksys...
•
Answered
on Aug 08, 2009
Need port forwarding on my actiontec router to support my Linksys
I have an Actiontec and did not have to do a port forwarding to get the camera to work. Worth a try.
Normal
0
Try
disconnecting the Camera from the USB port and
reinstall the CD software
program. When the program
asks you to connect the camera to the
USB port, do so and
it should work.
Then
to use it on the Web do this.
Web Camera’s have to be
setup on the program they are to be used with. Just installing the camera
on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for
the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing
Skype (
http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/
) set it up as follows:
- Go to Tools,
then Options, and click on Audio Settings and set the Microphone
and Speakers to the computer Audio Card.
- Then
click on the Video Settings.
- The
camera if Installed Properly will come up and show a video picture.
- Then,
on the bottom of the page click on Save.
The camera and audio should function properly. Your
friends and Family will now be able to see and her to you.
B. Yahoo Setup:
After downloading and installing
Yahoo Messenger
(
http://www.soft32.com/download_30.html
) set it up as follows:
- Go to
Messenger at the top left and click on it.
- Next
go down to Preferences and click on it.
- Next
Calling and Devices on the right and set the Microphone and Speakers to
the computer Audio Card.
- Next
go to the Test Audio section and (in blue writing) click on
“Open the call setup assistant” and follow the instructions on the left
window.
C. Windows Live Messenger:
- After
you start Windows Live Messenger, expand the view by clicking on the
square on top left next to the red X.
- Then
on the Windows Live messenger window on the right side, click on “ “Show
Menus.” And then click on “Show the Menu Bar”.
- Next
go to the Menu Bar on right side, click on “ “Action.”
- Go to
“TOOLS” and click “Audio and Video Setting” and follow the
instructions.
NOTE: You audio and video should work. Enjoy.
When done both the Audio and Video will function properly so
you can chat and see family or friends you are connected to.
Hope this helps. Bud
1/30/2009 5:51:23 PM •
Linksys...
•
Answered
on Jan 30, 2009
Port forwarding on my Actiontec router to access my Linksys wvc54gc camera.
I have Actiontec and didn't need to do Port Forwarding.
Normal
0
Try
disconnecting the Camera from the USB port and
reinstall the CD software
program. When the program
asks you to connect the camera to the
USB port, do so and
it should work.
Then
to use it on the Web do this.
Web Camera’s have to be
setup on the program they are to be used with. Just installing the camera
on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for
the Audio and Video to function properly.
A. Skype Setup:
After downloading and installing
Skype (
http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/
) set it up as follows:
- Go to Tools,
then Options, and click on Audio Settings and set the Microphone
and Speakers to the computer Audio Card.
- Then
click on the Video Settings.
- The
camera if Installed Properly will come up and show a video picture.
- Then,
on the bottom of the page click on Save.
The camera and audio should function properly. Your
friends and Family will now be able to see and her to you.
B. Yahoo Setup:
After downloading and installing
Yahoo Messenger
(
http://www.soft32.com/download_30.html
) set it up as follows:
- Go to
Messenger at the top left and click on it.
- Next
go down to Preferences and click on it.
- Next
Calling and Devices on the right and set the Microphone and Speakers to
the computer Audio Card.
- Next
go to the Test Audio section and (in blue writing) click on
“Open the call setup assistant” and follow the instructions on the left
window.
C. Windows Live Messenger:
- After
you start Windows Live Messenger, expand the view by clicking on the
square on top left next to the red X.
- Then
on the Windows Live messenger window on the right side, click on “ “Show
Menus.” And then click on “Show the Menu Bar”.
- Next
go to the Menu Bar on right side, click on “ “Action.”
- Go to
“TOOLS” and click “Audio and Video Setting” and follow the
instructions.
NOTE: You audio and video should work. Enjoy.
When done both the Audio and Video will function properly so
you can chat and see family or friends you are connected to.
Hope this helps. Bud
1/30/2009 5:48:23 PM •
Linksys...
•
Answered
on Jan 30, 2009
Not finding what you are looking for?