20 Most Recent NetGear WIRELESS-G WGR614 802.11G WIRELESS ROUTER ($20.00 M.I.RebateTill 06/30/2004) (NETWGR614) - Page 8 Questions & Answers


If its the new one you have to configure it by opening the router by connecting to physically with your system with lan cable. eg. default ip of company is 192.168.1.1 than type in browser http://192.168.1.1 and than configure as per your requirement and than you the if range of the same subnet. For any further qurey feel free to contact.

NetGear... | Answered on Jan 16, 2009


Follow the steps in this simple tutorial:

http://portforward.com/english/routers/port_forwarding/Netgear/WGR614v7/Flatout_2.htm


NetGear... | Answered on Jan 08, 2009


Hi,
You can do this manually by putting a paper clip or something sharp into the little reset hole in the back and holding for 15 seconds, then waiting for all the lights to stop flashing and remain on.
Or you can open your internet browser and type 192.168.2.1 (if that is wrong for your router try 192.168.0.1 or 192.168.1.1) and if it asks you for a username and password, just try admin and password (or just google your router model followed by 'default username and password').
There will be a menu listing for rebooting or restoring factory settings, then you enable that and wait for the process to complete. This can take up to 30 seconds after it says 100% so be patient, it will tell you when you can connect to the internet.

Good luck!

Chris (ziraffa)

NetGear... | Answered on Dec 28, 2008


Hi,

Netgear provides all images. Just scroll down the page until you find what you need.

http://kbserver.netgear.com/kb_web_files/n101649.asp

use the manual listed below and follow the instructions


http://kbserver.netgear.com/pdf/wgr614v6_ref_man_20Apr05.pdf

Chris (ziraffa)

NetGear... | Answered on Dec 28, 2008


Hi,
Go into your router settings by opening your internet browser, clicking in the URL address bar, and typing in the router's domain address, either 192.168.0.1, or 192.168.1.1 or 192.168.2.1, and Enable UPnP.
This is known as port forwarding.
Good Luck
Chris (ziraffa)

NetGear... | Answered on Dec 28, 2008


Hi,
You can do this manually by putting a paper clip or somethingsharp into the little reset hole in the back and holding for 15seconds, then waiting for all the lights to stop flashing and remain on.
Oryou can open your internet browser and type 192.168.2.1 (if that iswrong for your router try 192.168.0.1) and if it asks you for ausername and password, just try admin and password (or just google yourrouter model followed by 'default username and password').
Therewill be a menu listing for rebooting or restoring factory settings,then you enable that and wait for the process to complete. This cantake up to 30 seconds after it says 100% so be patient, it will tellyou when you can connect to the internet.

Good luck!

Chris (ziraffa)

NetGear... | Answered on Dec 28, 2008


Hi,
You can do this manually by putting a paper clip or something sharp into the little reset hole in the back and holding for 15 seconds, then waiting for all the lights to stop flashing and remain on.
Or you can open your internet browser and type 192.168.2.1 (if that is wrong for your router try 192.168.0.1) and if it asks you for a username and password, just try admin and password (or just google your router model followed by 'default username and password').
There will be a menu listing for rebooting or restoring factory settings, then you enable that and wait for the process to complete. This can take up to 30 seconds after it says 100% so be patient, it will tell you when you can connect to the internet.

Good luck!

Chris (ziraffa)

NetGear... | Answered on Dec 28, 2008


Hello,
have you tried to follow the manual chapter 3, page 3-1 ?
If you lost your manual you can find one here:
http://kbserver.netgear.com/pdf/wgr614v6_ref_man_20Apr05.pdf

One of your computers can go online because its using a wired connection to the router, but the wireless clients cannot access the connection - is this right?

Then you only need to setup the wireless part in the router.

NetGear... | Answered on Dec 15, 2008


If your computer is running on win vista click here.

NetGear... | Answered on Jul 14, 2008


I had this problem before. I found solution on utorrent website. Don't remember how to do it exactly but it has to do with port forwarding settings.

NetGear... | Answered on Jun 23, 2008


Just enable router security, go in to the web based user interface by typing http://192.168.0.1 A little box may pop up prompting you for a user name and password, if you havent set one of your own try user: admin and password: admin OR user: admin password:password. This opens your settings...

Next, hide your SSID, which isnt much protection against experienced hackers but for this instance should do just fine. Then Click the "Wireless Settings" link on the left side of the page under "Basic Settings". Choose WPA-PSK under "Security Options". WEP is easily hackable DO NOT USE as encryption type unless your OS doesnt support it. I can hack WEP in ten minutes so be aware this is not really a secure option.

Enter an 8-63 character passphrase in the passphrase box and apply. If yopu only have a few home computers, you can al;ways filter by MAC address whcih basically prevents any compouter that hasnt had thier MAC entering into the router manually from connecting.

NetGear... | Answered on Jun 15, 2008


return it to the store where you bought it
its a manufacturer problem

NetGear... | Answered on Mar 08, 2008

Not finding what you are looking for?
NetGear WIRELESS-G WGR614 802.11G WIRELESS ROUTER ($20.00 M.I.RebateTill 06/30/2004) (NETWGR614) Logo

165 questions posted

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2276 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Mike

Level 3 Expert

4357 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

NetGear Computers & Internet

  • NetGear Computers & Internet

Most Popular Question

reset netgear wgr614

  • Computers & Internet
Loading...