20 Most Recent Palm TX Handheld - Page 2 Questions & Answers

try code from service provider.

Thank you for using fixya.com

Its been a pleasure working with you.

My suggestion to recover your data is put that old hard drive into another enclosure then run the time machine again for the recovery process.

This will get your calendar back in order again.

It is a little involved to take out the old hard drive and put it in a new enclosure you might have to take it to a computer expert in your area.

If the drive is crashed then yeah you would need data recovery witch does run $60 per hour.

I hope your satisfied with out phone call.

Regards,


Rulds2008
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Not sure whether the CD can be found anywhere, but PalmDesktop and HotSync (Windows or Mac), plus user guides are available for the Palm TX at:
http://kb.hpwebos.com/wps/portal/kb2/na/tungsten/tx/unlocked/home/page_en.html

You can still use your phone when it's plugged in. I honestly don't understand the question at all

I would consider this more of a hardware problem than software. some component is going faulty.. most probably the display IC or LCD itself. but first, i would recommend re-soldering the LCD connector. then test. check picture below.
thanks

I would like you to try a soft reset, please follow these steps.
1. Grab an unfolded paper clip.
2. Locate and Press the reset button on the back of your handheld (small hole above the speaker)
3. Your device will reset and you will have to reset the time.
4. Don't worry as all of your data will be retained.
5. Make sure the battery has a charge and test your device.

try hard reset but make sure you backed up your files :)

in prefs>connection>BT to generic GSM
then connect to phone> via bluetooth> then tap to find the device
the follow the instructions. :) you can now connect your phone to your device

try screen calibration you can find it in prefs. if not solved, try installing powerdigi. it calibrates screen almost perfectly!

try screen calibration you can find it in prefs. if not solved, try installing powerdigi. it calibrates screen almost perfectly! it's not free though, you can try first the demo version :)

try screen calibration you can find it in prefs. if not solved, try installing powerdigi. it calibrates screen almost perfectly!
source: my experience!

try to download powerdigi. it calibrates screen almost perfectly. It's not free though but you can first try the demo version then buy it if you want :).
source: by experience :)

try freewarepalm.com. There are tons of sites offering free games for palm and even trial games. :)

may be there is proxy settings you haven't input.

check the wifi signal. if it's not the prob, ask the system administrator for the security key (other wifi requires this), proxy settings (proxy server and port no.)

try ebay or amazon. there are lots of sites selling them. :)

try screen calibration. you can find it in prefs. the lines may be because your device fell or experienced some kind of shock. if screen calibration still won't work try downloading powerdigi (it's not free though, you can try first the demo) it calibrates screen almost perfectly! :)
Try cleaning the sides of the screen using cloth or thin paper to remove dust. accumulated dust may cause the lines. if not, ask for repair centers though it is very costly.

1. Press and hold the Power (on/off) button on the front panel of your device.
2. While holding Power, use an unfolded paper clip, or the reset tool at the tip of your stylus. Gently press and release theRESET button inside the hole on the back panel of your device. (the reset hole is on the back of the device)
3. If you see a progress bar , keep holding the Power button.
4. Next, the Palm Powered screen will appear. Release the Power button when you see it.
5. You'll see a screen that asks: Erase all data? YES = "up" button NO = any other button. Press UP on your 5-way navigator to complete the hard reset.

Your device will then take you through a series of screens to calibrate the digitizer and verify the time and date.

Note: A hard reset does not delete the current date and time. It does restore other settings to the factory default.

have you tried soft reset? or may be hard reset but before this just make sure you backed up your data. It will revert back to default settings.