To connect your audio receiver to your Proview 3200 flat screen TV, you can use RCA cables. Here are the steps:
Locate the RCA jacks on your TV and audio receiver. One jack is white, and the other is red.
Plug the white RCA cable into the white jack on the TV and the red RCA cable into the red jack. Reversing them will cause the stereo signal from the TV to be incorrect.
Take the other end of the RCA cables and plug the white and red ends into an available RCA input on the back of your audio receiver.
If your TV doesn't have RCA jacks, you can use a digital-to-analog audio converter to connect your TV to a 5.1 audio system that has only RCA inputs 1. You can follow these steps:
Unbox the digital-to-analog converter.
Connect the optical cable to the converter.
Connect the RCA cable to the converter.
Connect the other end of the RCA cable to an available corresponding analog audio input on your audio receiver
The HDMI to RCA cables are intended for A/V devices like projectors that understand how to translate the digital signal to an analog signal. Your amplifier will not be able to do this.
What make/model TV do you have? I don't know of any with HDMI outputs. Most only have HDMI inputs. What is your TV source (OTA/cable RF, set-top box, streaming device)? Does your TV have any audio out (digital audio output - fiber-optic or coaxial)?
If you have an HDMI source, you could use an Audio Extractor. See https://www.amazon.com/HDMI-Audio-Extractor/s?k=HDMI+Audio+Extractor . You probably will need an extra HDMI cable and depending on the model either an RCA audio cable or a AUX to RCA cable. Plug in the source to the extractor's HDMI In, connect the HDMI Out to an HDMI input on the TV. Connect the extractor's analog audio output to one of the Yamaha AX-396 Audio IN connections. Connect the power adapter to the extractor and plug it in. Then turn on all of the components of your home theater system. (Probably you won't need to connect the HDMI out of the extractor back to the TV if your TV does have an HDMI out.)
If your TV has a digital audio output, you could use a digital to analog audio converter. https://www.amazon.com/DA-Converters/b?ie=UTF8&node=3224445011 lists some options. Again you may need to purchase extra cables. Not all models are sold with the needed cables.
I hope this helps.
Cindy Wells
(note: you can expect any converter to have signal loss.)
Yes, to get sound from your Roku TV to your receiver when using the TV's built-in apps (such as switching to TV sound), you might need more than just RCA cables. RCA cables only carry analog audio signals, and many modern devices, including Roku TVs, use digital audio signals for better quality.
Here's what you can do to ensure you're getting sound from your Roku TV to your receiver:
Check Audio Settings on Roku TV:
Go to your Roku TV's settings menu.
Look for the audio settings section.
Make sure the audio output is set to the correct option for your receiver. This is usually HDMI ARC (Audio Return Channel) or Optical audio.
Use HDMI Cable with ARC Support:
If your receiver and TV support HDMI ARC, connect an HDMI cable between the ARC HDMI port on your TV and the ARC HDMI port on your receiver.
Ensure that the HDMI input on your receiver corresponds to the HDMI ARC output on your TV.
In the TV's audio settings, select HDMI ARC as the audio output.
Use Optical Cable (if no HDMI ARC):
If your TV and receiver don't support HDMI ARC, you can use an optical audio cable (Toslink cable).
Connect one end of the optical cable to the optical audio output on your TV.
Connect the other end to the optical audio input on your receiver.
In the TV's audio settings, select optical audio as the audio output.
Configure Receiver Settings:
Ensure that your receiver is set to the correct input source for audio. For example, if you're using HDMI ARC, select the corresponding HDMI input on your receiver.
TV App and Volume Settings:
When using apps on your Roku TV, make sure the volume is turned up and not muted within the app itself.
Adjust the TV's volume settings to an appropriate level that allows your receiver to amplify the sound effectively.
Test with Different Content:
Test the setup with different apps on your Roku TV to ensure that the issue is not specific to a certain app.
If you've tried these steps and are still not getting sound from your Roku TV through your receiver, it's possible that there might be compatibility issues between your TV and receiver. You could also try reaching out to Roku's customer support or your receiver's manufacturer for further assistance.
11.5" touchscreen, 1024 x 600 resolution, virtual keyboard with Swype
Built-in 802.11 WiFi and Bluetooth v4.0
Additional Features:
Rear 2MP camera and front 1MP webcam with microphone, auto-focus and digital zoom
microUSB 2.0 port, USB 2.0 port, headphone jack, microphone jack
32GB onboard storage memory, additional memory via microSD card slot
Built-in speaker
Up to 6 hours of battery life on a single charge
Weighs 1.65 lbs; 11.81" x 0.43" x 7.28" dimensions
Software and Applications:
Android 6.0 OS (Marshmallow)
Google Play (for applications)
Android Music Player
Media Formats: popular media formats
What's in the Box:
Tablet and AC adapter
Detachable keyboard
However, this does, so it seems to be country specs, or depending on age, because the Model number is the same.https://ca.alphachooser.com/tablet_computers--rca_11_galileo_pro--tablet_computer-specs-and-profile
Main category
HDMI tablet computer
Release year
Release month
Release day
General Specs
Wi-Fi
802.11 b/g/n
Location services
GPS
Display
Display Size
11.5in.
Display Resolution
Display total pixels
614400 pixels
Display's superficy (in square inches)
57.64 square inches
Display's superficy (in square mm)
1464.06 square mm
Dots per inch
103.23 dots per inch
Camera Specs
Camera
2-megapixel
Additional Camera
1-megapixel
Physical Features
Full keyboard
(Detachable, with a laptop-style touch pad)
Headset Jack
3.5mm
Available colors
Black
Weight (grams)
1,324.5 grams
Processor
Operating System
Android 6.0 Marshmallow
Processor
MT8127
Processor Speed
1.3GHz
CPU Cores
Memory
Memory
32GB
RAM
1GB DDR
Memory Expansion
MicroSD
Memory Expansion Limit
Up to 128GB
Battery Specs
Stand-by Time
2.1 weeks (Equivalent to 15.0 days or 360.0 hours)
Talk time
6.0 hours (360.0 minutes)
Music Playback Time
6.0 hours (360.0 minutes)
3G Talk Time
360.0 minutes
Usage time
360 minutes
Connectivity
Connectors
MicroUSB, USB (full-size), Keyboard dock
Bluetooth (YES)
HDMI (YES)
Other Specs & Features
Manufacture product ID
RCT6513W87DK
Warranty
1 year
Description:This HDMI tablet computer edges out a lot of tablets when it comes to overall weight, as it is tagged with a 46.72-ounce weight, which is the heaviest we have encountered so far (at least as of 2016), but is probably explained by its included detachable keyboard, and it is furnished with an above-average 32GB of built-in memory, which can further be increased to up to 128GB via a microSD card (not included in the package). Besides, it also does not seem poised to capture stellar-quality photos, as it only bets on an ordinary 2-megapixel main camera and a lowly 1-megapixel selfie camera.
..
Sure, here are some possible things you can do if your RCA DVD Recorder+VCR Combo DRC8320N is not working:
Check the power cord. Make sure that the power cord is plugged in securely and that the outlet is working.
Reset the DVD recorder. Unplug the DVD recorder from the power outlet for 30 seconds, then plug it back in.
Try a different DVD. If you are trying to play a DVD, try a different DVD to see if that works.
Clean the laser lens. The laser lens is responsible for reading the DVD discs. If the laser lens is dirty, it may not be able to read the discs correctly. You can clean the laser lens with a soft cloth and some isopropyl alcohol.
Replace the laser assembly. If the laser lens is damaged, you may need to replace the laser assembly.
Take it to a repair shop. If you have tried all of the above and the DVD recorder is still not working, you may need to take it to a repair shop.
Here are some safety guidelines to keep in mind:
Do not attempt to open the DVD recorder yourself. This could void the warranty and could also be dangerous.
Do not use any chemicals or solvents to clean the DVD recorder. This could damage the components.
If you are taking the DVD recorder to a repair shop, be sure to pack it carefully. You do not want to damage the components during transport.
It could be due to wornout or broken belts,the VCR uses belts to operate various the mechanical components.If the belts are damaged the machine may stop playing tapes.
It can also be an electrical problem,if there is an issue with the the electrical components of the machine such as power supply or circuit board.it may cause the machine to stop playing tapes
Question edited for clarity.
You state "I tried to play my DVD player in the AV output". It should be the AV Input not the Output on the television. Ideally you should be connected by an HDMI cable!
You need to do a Factory Reset. That should bring back the Default code.
Hi Kristy, the backlight inverter is part of the power board however I doubt this is the issue, most likely you have at least one LED button that's open, they wire these like Christmas lights, remove one bulb the string goes dark, I own a TV service center and we get hundreds of sets with no backlights a year, about 95% of the time it's the actual backlights that have failed as the inverter section seldom gives issues, you will need to remove the panel and defusing panels to get at the lamps, be VERY careful handling the panel, it's quite fragile and static electricity can damage it, we have the proper gear to handle it in our shop, what Ive recommended for home repair is put shoes on then put a few an inch of water in the bath tub and get your shoes wet before removeing and replacing the panel, this will eliminate static damage. Good luck!!
To program your RCA universal remote to control your Naxa DVD player ND-861, you will need to use the correct code for your device. Here are the steps to follow:
Power on your Naxa DVD player.
Press and hold the "Code Search" button on your RCA universal remote until the indicator light turns on.
Release the "Code Search" button.
Press and release the "DVD" button on your RCA remote.
Enter the code for your Naxa DVD player. You can find a list of RCA remote codes for Naxa DVD players in the RCA remote manual that came with your remote or by searching online. For example, the code for Naxa DVD players may be 3394.
Press the "Enter" button on your RCA remote. The indicator light on your remote will turn off if the code was entered correctly.
Test the remote to see if it's working. Try playing a DVD and using the remote to navigate the menu.
If the first code you tried didn't work, repeat the steps with a different code until you find one that works. If none of the codes work, it's possible that your RCA universal remote is not compatible with your Naxa DVD player.
First off, even with the IC numbers are you going to be able to replace the faulty parts, in most cases it's not something that can be done without a soldering station, plus hot air station and advanced soldering skills, it's not like soldering a couple wires together. If you're able to replace them take the numbers off the top of the chips and cross reference them.
