20 Most Recent Samsung YP-U2X Digital Media Player - Page 3 Questions & Answers

you can try downloading a data recovery program and you just may be able to get the software back try easy recovery

format it and see if that works.this will delete all of your songs so back them up first.if you want instructions on how to format email me at [email protected]

I totally doubt this is the issue but maybe dust is causing your problem.

YP u2 J is only audio player? Can it be used to store pictures from pc and tranfer them to digital picture frame?

You would need to get it repaired by Samsung - not cheap. You could also buy another broken one on eBay with a working screen and switch it out that way. But no offense but you wouldn't be asking the question if you had the ability to do that.

The problem may be due to one of these :

1. The USB port on the computer may be a bit loose, which is why you are getting the message "connect/disconnect", which is the reason why you are able to find the device in the os.

2. If you are using the Yepp with mac, you are going to have to upgrade its firmware using a windows pc. yepp has compatability issues with mac.

In case you have a problem to connect your Samsung YP-U2J Mp3 player, you should update Firmware to get it working. The new Firmware may be downloaded from Samsung.com.

CLICK Here to Download : Firmware Update

In case u have WMP 11 and player not working, this error is common after installing Windows Media Player 11

Here is the instruction:

1. Download the YP-U2J Updater
   
2. Remove Mp3 player if you already connected to the USB port
   
3. Run the program (You should see something like: Please connect the device)
4. Hold down the Play button and connect the Mp3 Player to USB port (Hold down the play button while you connect the device, you should see a message (normally after 8 seconds) like: Initializing on YP-U2J Updater program screen)
   
5. After you hear the Windows chime "new device found" or the message "Initializing" on YP-U2J Updater, you can now remove your hand from play button.
6. Check the Format Data Area checkbox (By clicking the yes button, you will lose all of your data in your Mp3 player)
   
7. Click the "yes" button
   
8. Finally, click on the Start button (takes less than a minute). DO NOT REMOVE YOUR DEVICE
   
9. IMPORTANT: After updating the firmware, you MUST disconnect the Mp3 player and turn it on. You will see a 20% message for about 50 seconds and it will be restarted automatically.

Update: Please keep in mind that if you sync your Mp3 player with a computer that has a Windows Media Player 9 or 10, you should do these steps again

Hold Power and a/b buttons for five seconds to reset.

eat it and try again

If you can´t format your pendrive from my computer (mi pc) do this:

go to control panel (panel de control), administrative tools (herramientas administrativas), device administration (administración de dispositivos). Then, right click on your pendrive and click format. that´s all

My samsung yp-u2j is not connecting, its realy pissing me off, because my cumputed wont download the new hardware i need...

i have the samsung yp-u2 b 512mb mp3 player but now no power and i do't about it frimware ver
chip ver is 3500
plz send me frimware/solution of it my id is


[email protected]

Hey,actually mine is aYP-U2 ZW/XSA white colour piece.
What happened to it I don't Know........Only its showing songs folders & It also showing some AutoRun.........It's not showing any settings etc when I go back.............
could u Please tell me How to resolve this problem?

Here's the site with the firmware upgrade download: http://www.samsung.com/support/productsupport/download/Model_Select.aspx?type=Digital+Audio+Player(YEPP)&typecode=200600&subtype=Yepp&subtypecode=200601&model=YP-U2JQB/XAA&filetype=FM&language= although I'm sure that the f/w updater is within this program here: http://www.samsung.com/support/productsupport/download/Model_Select.aspx?type=Digital+Audio+Player(YEPP)&typecode=200600&subtype=Yepp&subtypecode=200601&model=YP-U2JQB/XAA&filetype=SW&language= That should help you with your problem. First download and install the first link, then use the tools that are within that program. Once finished, update it with the firmware update and you should be alright.

hi plz connect to the player in computer usb port and check the properties if thedisk of ur player is full that meanz your player iz ok no tension now u will format ur player memory thourough the format option clicking ur left mouse b click if the pc format it now reload the data or song in ur player also u scan the data of the disk in same menu like scandisk.

if the step is not worked now u can get the firmware to download in samsung site by searching ur product model number.... first u try the step 1


bye .Faisal

The solution could be one of the following according to ur problems:

1. If u are using a usb hub, it might not be getting enough power to get charged.
2. Check if the hold key is activated, if so the player wont turn on. The hold key is adjacent to the side of the volume '-' key.

I have the same problem with my player same model....

Click here for Firmware Update from samsung.com

Here is the instruction for updating the firmware:

1. Download the YP-U2J Updater
   
2. Remove Mp3 player if you already connected to the USB port
   
3. Run the program (You should see something like: Please connect the device)
4. Hold down the Play button and connect the Mp3 Player to USB port(Hold down the play button while you connect the device, you should seea message (normally after 8 seconds) like: Initializing on YP-U2J Updater program screen)
   
5. After you hear the Windows chime "new device found" or the message"Initializing" on YP-U2J Updater, you can now remove your hand fromplay button.
6. Check the Format Data Area checkbox (By clicking the yes button, you will lose all of your data in your Mp3 player)
   
7. Click the "yes" button
   
8. Finally, click on the Start button (takes less than a minute). DO NOT REMOVE YOUR DEVICE
   
9. IMPORTANT: After updating the firmware, you MUSTdisconnect the Mp3 player and turn it on. You will see a 20% messagefor about 50 seconds and it will be restarted automatically.

If the operating system was deleted, then you need to buy a new MP3 player.

Error C00D1236 virtually always indicates one of two things:

1) The device is trying to sync hidden files--are there any?
2) There is licensed media that is being synced, and the license is either corrupt or has expired. If you have any licensed media, then try going back to where you purchased it (in an iTunes-like music management program? In WMP?) and refresh/renew the license.

The bad news is that until C00D1236 is resolved, you can't sync your device.

You can bypass syncing, and directly transfer files, In my computer, the mp3 plaer will be shown as a drive.

Now if one of the two solutions above is not feasible for u, try this:

In case you have a problem to connect your Samsung YP-U2J Mp3 player, you should update Firmware to get it working. The new Firmware may be downloaded from Samsung.com.

CLICK Here to Download : Firmware Update

This error is common with Windows Media Player

Here is the instruction:

1. Download the YP-U2J Updater
   
2. Remove Mp3 player if you already connected to the USB port
   
3. Run the program (You should see something like: Please connect the device)
4. Hold down the Play button and connect the Mp3 Player to USB port (Hold down the play button while you connect the device, you should see a message (normally after 8 seconds) like: Initializing on YP-U2J Updater program screen)
   
5. After you hear the Windows chime "new device found" or the message "Initializing" on YP-U2J Updater, you can now remove your hand from play button.
6. Check the Format Data Area checkbox (By clicking the yes button, you will lose all of your data in your Mp3 player)
   
7. Click the "yes" button
   
8. Finally, click on the Start button (takes less than a minute). DO NOT REMOVE YOUR DEVICE
   
9. IMPORTANT: After updating the firmware, you MUST disconnect the Mp3 player and turn it on. You will see a 20% message for about 50 seconds and it will be restarted automatically.

Update: Please keep in mind that if you sync your Mp3 player with a computer that has a Windows Media Player 9 or 10, you should do these steps again