Its
very easy...here is a link to a user manual.
It isnt the exact brand
but all mp3 players are the same basic instructions:
http://mp3support.sandisk.com/downloads/um/c200v2-um-eng.pdf
First try and reset the player.
1. Press and hold the Power/Menu button
for approximately 20 seconds.
2. Release the Power/Menu button.
3. Press the Power/Menu button
again to turn on the player.
If that does not work try this,
Remove the battery
- Power cycle the player
1. Connect the device to the PC.
2. Leave the device connected for about 2 minutes.
Turn on the device
1. Disconnect the player from the PC.
2. Insert a fresh AAA battery into the player.
3. Turn on the player.
STEP 1 - Connect the device to the
computer
1. Remove the battery from the player's battery
compartment.
2. Put the hold/lock switch to lock.
3. Plug in your device to the computer.
STEP 2 - Format the device
1. Double-click My
Computer.
2. Right-click on the player, which might show up
as a Removable Drive, select Format.
3. Click Start.
4. Click OK when a "Format Complete" dialog appears.
5. Click Close.
1,029 questions posted
Usually answered in minutes!
4,073 Questions
2,449 Questions
2,122 Questions
974 Questions
799 Questions