519. REPLACEMENT PARTSWhen replacement parts are required, be sure the service technician uses replacement parts specified bythe manufacturer or those that have the same characteristics as the original part.Unauthorized substitutions may result in fire, electric shock or other hazards.20. SAFETY CHECKUpon completion of any service or repairs to this unit, ask the service technician to perform safety checks todetermine that the unit is in proper operating condition.21. HEATThe product should be situated away from heat sources such as radiators, heat registers, stoves, or otherproducts (including amplifiers) that produce heat.22. DISC TRAYKeep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.23. CONNECTINGWhen you connect the product to other equipment, turn off the power and unplug all of the equipment fromthe wall outlet. Failure to do so may cause a product damage. Read the owner's manual of the otherequipment carefully and follow the instructions when making any connections.24. LASER BEAMDo not look into the opening of the disc tray or ventilation opening of the product to see the source of thelaser beam. It may cause sight damage.25. DISCDo not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause seriouspersonal injury and product malfunction.26. NOTE TO CABLE TV SYSTEM INSTALLERThis reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the NEC thatprovides guidelines for proper grounding and, in particular, specifies that the cable ground shall be con-nected to the grounding system of the building, as close to the point of cable entry as practical.IMPORTANT SAFEGUARDS / Power sourceTO USE AC POWER SOURCEUse the AC polarized line cord provided for operation on AC. Insertthe AC cord plug into a standard 120V 60Hz polarized AC outlet.Notes:• Never connect the AC line cord plug to other than the specifiedvoltage (120V 60Hz). Use the attached power cord only.• If the polarized AC cord does not fit into a non-polarized ACoutlet, do not attempt to file or cut the blade. It is the user’sresponsibility to have an electrician replace the obsolete outlet.• If you cause a static discharge when touching the unit and theunit fails to function, simply unplug the unit from the AC outletand plug it back in. The unit should return to normal operation.Polarized AC Cord Plug(One blade is wider than the other.)AC OutletWider Holeand BladePower sourceWARNINGHandling the cord on this product or cords associated with accessories sold with this product, will exposeyou to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.Wash hands after handling.2I30101B-En_p02-131/12/06, 17:045
Wiz