20 Most Recent All-Pro K175 Heater Questions & Answers

manual

K175 Heater Manual

All-Pro K175 HeaterUploaded on Dec 28, 2014

0helpful
1answer

Need a new 8 rotor for a model #

Look on www.desatecl.com
You should be able to order one from there. You will have to look up the part # there.
1/6/2011 10:42:41 PM • All-Pro K175... • Answered on Jan 06, 2011
0helpful
1answer

I have an All Pro SPC K100. The fan runs and mist

You probably have a klixon/high limit popped out or failed. This video shows were it is on another heater and although yours is different they all have limit switchs thanks to ralph nader. LOL
Check this out: HERE
If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61
1/9/2010 12:27:02 AM • All-Pro K175... • Answered on Jan 09, 2010
0helpful
1answer

Unit turns itself off after a minute

This is a safety design, now find out why did it tripped? or it time for a full service or overhaul, like plug-- fuel filter --- 2-- air filters vanes in the pump assembly which you can buy at your local lawnmower repair shop!
12/21/2009 6:00:28 PM • All-Pro K175... • Answered on Dec 21, 2009
0helpful
1answer

I have a All Pro 200T - purchased from Home Depot

You may know that All-Pro declared bankruptcy.
"World Marketing of America" handles the parts for that unit. DESA handles the services.
9/30/2009 6:07:41 PM • All-Pro K175... • Answered on Sep 30, 2009
0helpful
1answer

My All-Pro model SPC-85 will not ignite.

if safety cicuit is ok check to see if voltage to ignitor if yes but doesnt glow replace
2/3/2022 5:13:03 AM • All-Pro Heating... • Answered on Feb 03, 2022
0helpful
1answer

I have a All-Pro propane heater model # Universal 85-FAC. I can get it to start but when I take my hand off the starter button it shuts off?

Its the thermacouple. It's a peice that senses the heater is lit and keeps the gas valve open. They are fairly cheap to replace.
1/19/2019 1:38:03 AM • All-Pro Heating... • Answered on Jan 19, 2019
0helpful
1answer

I HAVE A ALL-PRO SPC-85 HEATER. IT WILL LIGHT AND RUN, BUT IT SEAMS TO NOT BE GETTING ENOUGH GAS. WHAT CAN I LOOK FOR?

Your gas pressure is regulated by the gas valve .You will need a special tool to check gas pressure on the gas valve .
Make sure burners are clean ,filters and blower wheel .
A lot of time dust settle on blower wheel and make it harder to spin causing reduction on air movement
2/15/2018 1:08:13 PM • All-Pro Heating... • Answered on Feb 15, 2018
0helpful
1answer

I have an All-Pro K170 forced air heater. the low voltage light comes on after a couple seconds of running then shuts off? What causes this?

You might have a bad or dirty flame sensor.
Take it out and clean with sandpaper.
12/16/2017 6:33:01 PM • All-Pro Heating... • Answered on Dec 16, 2017
0helpful
1answer
0helpful
1answer

My cleaner will not such up the dirty water

Check filter is clean on tank
10/30/2016 2:21:46 PM • All-Pro Heating... • Answered on Oct 30, 2016
Not finding what you are looking for?
All-Pro K175 Heater Logo

7 questions posted

Ask a Question

Usually answered in minutes!

Top All-Pro Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you an All-Pro Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

All-Pro Heating & Cooling

  • All-Pro Heating & Cooling

Most Popular Question

all pro 200t purchased from home depot

  • Heating & Cooling
Loading...