http://www.fixya.com/support/p43797-aeg_lavamat_w1050_front_load_washerSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comFri, 25 Dec 2009 22:51:52 GMT80http://www.fixya.com/support/t2833481-fills_water_but_drum_doesnt_turnit fills with water but the drum doesn't turnFri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t1213294-end_led_blinks_3_timesHi all, i'm starting a regular progrem, it looks like the machine is starting to fill the water, but after about 10 seconds the operation is stoped the machine drain the water and the End led is starting to blink 3 times. Any idea what the problem...Fri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t1242888-end_led_blinks_3_timesAs we give program to the machine. all usual LED light up for 2 seconds,than all LED switched off ,a hamming noise is hear from inside the machine .than the END LED start blinks for 3 times . Thanks Rosman Attard MaltaFri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t924098-water_not_pumping_out_therefore_noWe bought a second hand lavamat 1020 . It seems that the pump does not pump the water out. Therefore the spinning cycle does not occur at all either and when you open the machine all the water comes pouring out.Fri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t637652-aeg_lavamat_e1050_end_light_blinks_5In the middle of a program, my Lavamat machine stopped working and started to flash the End light 5 times. I turned it off, and when I try to reprogram it, it only flashes 5 times the End light, but nothing happens. The manual says nothing about the...Fri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t1408703-detergent_drawer_not_empty_detergentAfter a washing cycle the detergent is still in the drawer. I have a lavamat 61300 ThanksFri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t282928-ael_lavamat_509nhi there. purchased secondhand machine as moving in with some mates. the machine doesn't want to relinquish washing when finished...door stays locked. need urgent assistance. thank youFri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t360540-aeg_lavamat_w_1020The soap does not dissolve completely from the dispenser, and water remains in the left part (where softener goes) after a complete cycle. After a cylce, we find a large clump of hardened detergent. We did not experience this problem before and use...Fri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t640588-still_not_workingI cleaned the exit hose (yes, it was full of **** ...) and the filter but still the same problem (End LED blinks 5 times and nothing else happens) remains. Any idea?Fri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t314780-aeg_lavamatthe door does not open when the machine fiishes cycling. I must unplug the cord to get it to open. this is used manchine just purchasedFri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t116207-washing_machine_drum_rattlesI think there is the underwire from a bra caught somewhere in the drum making it rattle and spin violently when its on! How do I remove offending item? ThanksFri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t152855-washing_powder_residues_left_in_washingThe AEG 50400 machine we have has a selective powder compartment jet spray system, which isn't working effectively in that some of the water jets are not working ( I have cleaned all the jets). The user manual says for possible causes 1. Water tap...Fri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t148758-red_flashing_f6_codeI have an AEG OKO LAVAMAT 695 and as I could not see the model listed anywhere put my question here. The machine has started flasking a red F6 on the front panel and there has been some water on the floor. Any ideas. Thanks in...Fri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t126176-water_smellingANy ideas how we can stop the waste water smelling. We have our washing machine in our basement/cellar. The waste water goes into a tub/container. In the tub is a submersible pump which pumps the water up to ground level drains. There is a...Fri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t130183-not_spin_when_inserting_5_5kg_clothesi have problem with the weight of clothes. this is new mechineAEG Lavamt W1050 about 3 years. it wont spin if inserting 5.5kg clothes into drum but when decrease wight it is o.k. let say decrease to 4 kg.Fri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t138751-aeg_washing_machineMy Aeg 1050 front loading washing machine is leaking water from underneath the powder drawer when its filling. The water is running down front of machine and creating puddles. whats wrong with it and what can I do to stop it.?Fri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t115376-drum_stuckThe drum is stuck mechanically. Please advise how can I remove an object that might cause the problem.Fri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t194539-kenmore_elite_he3_front_loading_washerI have had alot of trouble with this washing machine. I have had it for a 1&1/2 years. First the rubber around the door went out and now on of one of the plastic things connected to the steel drums broke off. It is suppose to be such a great washer...Fri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t196807-front_panel_removalOpen door button is tuck. We are trying to remove the front control panel for access so we can un stick the buttonFri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t199171-drain_pump_replacement_instructionI have a top mount Roper washer that's leaking from the Drain Pump (It's the only thing that's wet when i looked in the bottom). Is it possible to get a step by step instruction on replacing the pump?Fri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t199347-miele_washing_machine_model_w713_front15 years old - no previous maintenance done Filters maintained clean. Problem: 1) machine leaks water underneath after completing wash & rinse cycle 2) always washes a very long time ( approx. 3 hours to complete) regardless of pressing short...Fri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t205803-washing_maching_not_taking_fabicHi, this machine is about 7 years old and work fine, except in the last couple of weeks it no longer takes in the fabic softner from the rinse draw. Apart from that everything is OK. Any idea on what's wrong?Fri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t208779-kenmore_washing_machinemy machine will not spin the timmer stops when it reaches the spin cycleFri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t210235-whirlpool_top_load_washing_machineThe agitator won't move during the washing cycle and the it will not dispense the softener. When the machine is off you can spin the agitator freely with your hand.Fri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t209335-whirlpool_washer_awm5100ACQUIRED ABOVE WASHER. UNACCOMPANIED BY INSTRUCTIONS MANUAL. PLEASE ADVISE HOW TO USE THIS MACHINE. THANKS.Fri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t213531-hoover_premier_10_1_kg_washing_machineOn the spin cycle the motor rotates, water is pumped out but the drum is not spinningFri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t213099-kenmore_washer_drain_pump_not_comingFills fine, agitates, gets to drain cycle and nothing happens- no noise from the pump- more common pump problem or timer problem?Fri, 25 Dec 2009 22:51:52 GMThttp://www.fixya.com/support/t213323-final_spin_cycle_kenmore_417_40042990My washer will not do the final spin cycle in any mode of wash, regular,perm press,etc. until I move the timer back to the begining of the final spin cycle after the initail cycle is over.The motor and timer have been changed.Fri, 25 Dec 2009 22:51:52 GMT