http://www.fixya.com/support/p43788-aeg_lavamat_16810_front_load_all_in_oneSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comFri, 08 Jan 2010 15:14:41 GMT80http://www.fixya.com/support/t3645379-e90E90Fri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t3525667-end_drying_time_clothes_steaming_hot_nutat end of drying time clothes are steaming hot nut not dried. Could this be the moter for circulating the air to the condenser box? E10 shows now after a few minutes. thanks. malcolmFri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t3299799-aeg_lavamat_16810_washer_dryer_dryMy aeg lavamat 16810 washer dryer won't dry. The error message is E10, meaning the water isn't going in. Water is running until the dryer kicks in, then the valve closes and it stops. The heater etc are working fine.Fri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t3413729-not_drying_clothesnot drying clothes still getting warm and turning but despite leaving it for hours the clothes never become dry just warm and dampFri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t3276398-tv_228_ttmaskin_stannar_mittTvättmaskin stannar mitt i tvättning med felkod C9 och lamporna för "Förtvätt" och "Skjölning" blinkar. Har ni några förslag? The washing machine stopped mid-wash with error code C9. The lamps for "Prewash" and...Fri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t3097136-mashine_not_pump_waterThe mashine does not pump the water out.Fri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t3062833-e10_proplem_aegE10 PROPLEM AEGFri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t2253342-earth_connection_defaultI have an AEG Lavamat 74639, bought in oktober 2002. The pump failed. Serviceman put in a new one. Then he said the "brushers" (which connected the engine to elektrisity, he explained), were gone. Skifted them. Then, when he started the washingmaskin...Fri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t2232593-dear_ladies_gentlemendear ladies and gentlemen, our problem is, that we have a full mashine stopp with e20 accuring on the led before the detenser enters the toumble. our mashine is an aeg 16809 e20 thanks for your fast replyFri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t2145481-aeg_lavamat_16820_washer_dryerI have an AEG Lavamat 16820 washer dryer and the door wont open any ideasFri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t1081552-lavamat_16820Hi there I have had a lavamat turbo 16820 since 2004 without problems. But a couple of months ago I kept getting Error E20 when doing the DRYING cycle only. There was no problem with the draining or hoses and I then used it only on the wash cycle and...Fri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t1754149-slim_twin_washer_not_startHi have a Whirlpool "Slim-Twin" Washer/Dryer combo. The dryer works perfectly. The washer however will not start at ANY cycle type. The agitator will also not turn, although I don't know if it's even supposed to turn before a cycle has started. I am...Fri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t1730927-door_not_open_after_wash_cycleI have a Servis Easi Logic 1300 washer dryer. Door opens without problems before a cycle starts, however the door latch area must be banged with a fist in order to open the door after a complete cycle. Anyone has any ideas on what the problem could...Fri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t1762377-aeg_16820_lavamat_turboHi there, I have this washing mashin and combined dryer. Recently the dryer has turned itself of after like?approximately 5 min... This now happens everytime I try to use the dryer only.. Does anyone have a clue what is wrong - and is there anything...Fri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t1837436-aeg_lavamat_turbo_12830_error_code_e20Washer dryer keeps stopping early in cycle displaying error code E20. We cannot find our manual and need to know what this error code means. Any help / suggestions?Fri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t137667-door_lockedHi. I've got an AEG 16810 washing machine and the door is locked and won't seem to open irrespective of power on / off. Is there an emergency release button somewhere or similar? Tks. PAulFri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t127807-error_messageDoor appears not to lock and E40 appears on screen...any idea's to fix this. It worked prior to moving houseFri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t1667965-aeg_lavamat_16820_strange_noise_comingAEG Lavamat 16820 When operating in ECO mode, exactly 23 minutes before the end of the cycle a strange noise can be heard (coming from motor perhaps). The noise diminshed to zero after approximately 2 minutes and then the cycle returns back to normal...Fri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t1670479-c9_error_aeg_lavamat_princess_s_updateI have the above washing machine in Dutch writing and it has come up with a C9 error and the Voorwas and spoelen + lights flashing. I can't seem to get it to work no matter what I press. I have turned the machine off and the same thing comes up which...Fri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t309197-aeg_washer_dryer_comes_up_e20_flashingmy aeg washer dryer comes up with e20 flashing i have checked the pipes, changed the pump cleaned the bottom filter, pump is now working but e20 fault still comes up half way through the wash cycle... how do I re-set the washing cycle?Fri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t1459780-much_water_entering_drumOn any wash, drum fills with too much water. i can hear the solenoid constantly switching on and off. Subsequently all water will not drain as timed at only 2 minutes. Have to drain 6 times.,Fri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t1468847-pump_problemMY LAVAMAT 528 ISNT SUFFICIENTLY PUMPING ALL THE WATER OUT AND CLOTHES ARE SLIGHTLY TOO WET.I FITTED A NEW PUMP WHICH IS WORKING BUT AGAIN AND ONLY IN SOME WASHES IT IS STILL TOO WET.SPIN APPEARS OK AND MOTOR BRUSHES AND COM ARE OK. ADVICE WELCOME...Fri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t1440467-aeg_lavamat_74620_shows_ce_errorThere's a clicking sound from the area of the detergent drawerFri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t1309568-frigidaire_front_load_washing_machineAll the lights are lit up on the front panel. When you try to start it it says err and then loc. We can't change any of the settings it wil say err and then switch to loc.Fri, 08 Jan 2010 15:14:41 GMThttp://www.fixya.com/support/t1309553-frigidaire_front_load_washing_machinethe door won't lock. We can't clear the panel to start over. All lights blink then it says err and locFri, 08 Jan 2010 15:14:41 GMT