http://www.fixya.com/support/p43783-aeg_lavamat_88840_front_load_washerSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comSat, 26 Dec 2009 01:56:08 GMT80http://www.fixya.com/support/t3707031-resetHow to reset?Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t2247200-clothes_come_out_steaming_hotI cont know much about washers, but i know its supposed to be cold at the end of the cycle, anyone have an idea? thanks SpencerSat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t2411810-white_streaks_dark_clothes_afterMy AEG L86810 washing machine has never rinced properly, leaving white streaks on dark clothing. I clean the door seal regularly and have cut back hugely on the amount of liquid wash and softener. Even if I don't use softener I still get the...Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t2359798-aeg_lavamat_6955_sensorlogic_showingAEG lavamat 6955 sensorlogic washing m/c, was showing F2, cleaned out pump,spin cycle continued OK but now F3+1000+900+spin lights flashing. Any ideas?''Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t2330657-c9_error_lavamat_88840Engineer analysed brushes OK but replacement motor needed - he has ordered the part.  Do not know how much this will cost?  Should I just buy another machine of any model or go with engineer's plan?  Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t1472957-aeg_lavamat_88840_display_c33 yrs old 88840 Suddenly C3 dispalys. Mashine start to drain properly. but the pump dont shut opp even with the switch on 0. Drainage pipes clean. Electrolux service center Uppsala Sweden. Very helpfull, Told me C3 means leakage of water town to the...Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t931366-reset_efo_aqua_control_systemI had a problem where the rubber seal on the front door was janked off and water sipped into the machine. ?Now the Aqua Control system is activated, the pump continously runs and the machine wont start. ?How do I reset the Aqua Control system?Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t152170-washing_machine_wont_pass_cycle_dialTHE MACHINE WILL START ITS CYCLE THEN WHEN IT GETS TO THE FIRST RINSE CYCLE IT WONT GO NO FURTHER AND THE SIGN C6 FLASHES ON THE SCREEN.I WAS WONDERIG IF THIS HAD ANY THING TO DO WITH MY RECENT MOVE, AS I DONT THINK THE BOLT FOR MOVING WAS...Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t638087-machine_get_rid_water_gives_no_drainI have AEG Lavamat 88810 washing machine, which is about 3 years old. Yesterday the item I washed gave off alot of fluffs and suddenly the machine stopped draining the water. The message it displays is "No Drain, check drain hose/filter" . We have...Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t385303-please_helpI own an AEG 6955 sensorlogic washing machine. This morning I did my laundry, but an error occurred at the end of the program: F9. My laundry was ready, there was no water left in the machine (or under it..) and it was as dry as always (I had heard...Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t370726-aeg_lavamat_6955_showing_f9_displayI had left a load in at night with a delay start option and this morning found an error code F9 on the panel. Two spin speed lights and the 'end' button lights are flashing and the load is obviously stuck. Could somebody please help me out urgently...Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t427413-problem_c2_aeg_lavamat_86741Hi, I've got a problem with my AEG: code C2. It seems the engine to push away the watter is not staring any more. Any idea of where the problem could come from ? Cheers cyrilSat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t422793-aeg_lavamat_1000Can anyone assist me in getting an operator's manual for the AEG Lavamat 1000 or scan one and send me copy?Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t407965-aeg_lavamat_88840_updatewe have had our machine for 2 years and its recently started to show a fault C3 on the screen and had not drained or rinsed the clothes properly. We have cleaned the filter and it seems to be working ok now, but is leaking in the last 20 minutes of...Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t155345-aeg_lavamat_6955Does anybody know what F8 means in the lcd panel ? The machine still completes its full washing cycle but F8 is not mentioned in the manual.Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t149891-anti_flodd_aqua_controlWe had a power cut and when the power came back on it must have kicked off the float switch. Now the drain pump runs continuously. I've tried switching the machine on and off but that doesn't work. Any ideas please ? Is it simply a question of...Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t125461-lavamat_6955_sensorlogic_carries_fillingThe washing machine is not blocked and does not have too many suds and it pumps out water OK but when it comes to fill up for the rinses it carries on filling until the water overflows from the top of the washer. This is not suds just plain water. ...Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t194539-kenmore_elite_he3_front_loading_washerI have had alot of trouble with this washing machine. I have had it for a 1&1/2 years. First the rubber around the door went out and now on of one of the plastic things connected to the steel drums broke off. It is suppose to be such a great washer...Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t196869-maytag_stops_any_cycle_after_warmHi, The washer stop in the middle of cycles after a while (usually in the second wash). Even if the cycle is changed it doesn't do anything. After couple of days and after the machine is disconnected you can use it again and it works fine but only...Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t198529-replacing_fins_duet_whirlpool_washerI am trying to replace the plastic fins inside the drum of my whirlpool duet washer. I have the parts, and it is officially clled the drum baffle kit. I have a picture of how to install it, but how do I get to the drum? From the picture it looks...Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t198784-kenmore_top_loading_washing_machineabout every 5th load of laundry the spin cycle, prior to finishing, will not go into spin. The machine rinses and then just sits there as if it is waiting on a signal to begin spinning. Once the time period for the spin cycle completes the washer...Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t199234-maytag_frontload_washer_door_leakinghi...i have a maytag frontload washer and there is a lot of water and suds leaking out the bottom and sides of the door. it is a circular clear door. inside there is gray stretchy lining around the door and this wire circle with a spring at the top...Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t200244-f_06_failure_light_kenmore_eliteKenmore HE Elite gets through half the cycle and F-06 signal goes off. I tried to drain/spin and F-06 goes off again. The main control board was replaced 5-07; after similar problems occurred. I don't want another $400 bill to get the washer...Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t200524-bosch_washing_machineWe replaced the pump, and it has been working fine for about a month. Now the machine is tripping all the house electrics as soon as it is switched on.Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t200684-washer_machine_drains_while_fillingI just received a used whirlpool washer maching..I tried to see the model # but it looks like it has been "wiped" off of it... It drains as it is filling. The spin and rinse cycle work. I tried raising the hose to 39" like I read somewhere, but that...Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t200789-problem_indesit_we16My indesit we16 keeps on saying door on the lcd screen about 3 mins after i try and start it. I changed the door interlock but this has not resolved the problem. Can anyone help?Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t202424-washing_machine_not_filling_water_notAt the start of washing cycle nothing happens at all.Machine does not fill with water and when you manually advance dial to further into wash mode machine starts to spin.It does not rinse in (rinse /spin) cycle but spins only and of course when dial...Sat, 26 Dec 2009 01:56:08 GMThttp://www.fixya.com/support/t204689-washing_machine_not_getting_cold_waterNot getting cold water. I think it might be the cold water solenoid. If this is the problem, how big of a job is it to replace the soleniid and where can get the parts and instructions. Estate TAWB600EQ Washing Machine.Sat, 26 Dec 2009 01:56:08 GMT