20 Most Recent
AEG B2100-4 Electric Single Oven - Page 6 Questions & Answers
Induction fault e6
E6 - Defect Induction module or over temperature of coil sensor with Falcon User interface with production date before 2010
Defect Induction module - Disconnect the appliance from the mains for 30 sec. If alarm still occurs after 1 min operation exchange induction module
.
Over temperature of coil sensor with Falcon User interface with production date before 2010 - temperature sensor defect or wrong mounted.
- Check connector at induction module.
- Check the coil sensor, it should be placed even in the silicon carrier.
- Appliances with 3 zones, is the "Dummy" temperature sensor at the 2nd terminal mounted?
- Exchange coil with sensor.
- If above is without success, exchange induction module.
Dado
11/7/2015 10:38:56 AM •
AEG Ovens
•
Answered
on Nov 07, 2015
How do I change the bulb inside the cooker of the B5741 cooker
Oven Lighting
Warning: There is a danger of electric shock! Prior to changing
the oven light bulb:
- Switch off the oven!
- Disconnect from the electricity supply.
Place a cloth on the oven floor to protect the oven light and glass cover.
Replacing the oven light bulb/cleaning the glass cover
- Remove the glass cover by turning it anticlockwise and then clean it.
- If necessary:
Replace bulb with a 40 watt, 230 V, 300 °C heat-resistant
oven light bulb.
3. Refit the glass cover.
Dado
11/7/2015 9:57:05 AM •
AEG Ovens
•
Answered
on Nov 07, 2015
Not finding what you are looking for?